All MIBs › PEA-TEST-IPDSLAM › loopDiagSnrNE
loopDiagSnrNE
Module: PEA-TEST-IPDSLAM
OID (symbolic): PEA-TEST-IPDSLAM::loopDiagSnrNE
OID (numeric): 1.3.6.1.4.1.193.72.300.20.1.28.1.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The near-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
What is loopDiagSnrNE?
The near-end signal-to-noise ratio per tone measured during loop diagnostics (range 0-255); the value 255 means no measurement is available for that tone -- a low SNR on specific tones points to noise or attenuation problems concentrated in that part of the frequency band.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.28.1.1 snmpwalk -v2c -c public <target> PEA-TEST-IPDSLAM::loopDiagSnrNE
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.28.1.1.1 snmpget -v2c -c public <target> PEA-TEST-IPDSLAM::loopDiagSnrNE.1
Start monitoring Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-TEST-IPDSLAM::loopDiagSnrNE OID value, configure state conditions and alerts, and monitor any Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.20 | peaTestIpDslam | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1 | peaTestIpDslamObjects | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.28 | loopDiagSnrTable | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.28.1 | loopDiagSnrEntry | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.28.1.1 | loopDiagSnrNE | PEA-TEST-IPDSLAM |