PDN-IF-EXT-CONFIG-MIB :: pdnIfMultiprotocolEncapConfigIPRoutedPDUs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-IF-EXT-CONFIG-MIB › pdnIfMultiprotocolEncapConfigIPRoutedPDUs

pdnIfMultiprotocolEncapConfigIPRoutedPDUs

Module: PDN-IF-EXT-CONFIG-MIB

OID (symbolic): PDN-IF-EXT-CONFIG-MIB::pdnIfMultiprotocolEncapConfigIPRoutedPDUs

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: In the upstream direction user can configure the IP routed PDUs in the LLC SNAP encapsulation or VC Based Multiplexing encapsulation (RFC1483). If neither is configured 'none' is used. The direction is determined by the transmit direction. Initialy this object was developed for the endpoint use where the transmit direction is upstream. This object could be used for CO type equipment where the direction would be downstream.

What is pdnIfMultiprotocolEncapConfigIPRoutedPDUs?

This object selects the Layer 2 encapsulation method used for IP-routed traffic sent upstream on a multiprotocol-encapsulated interface, choosing between no special encapsulation, LLC/SNAP framing, or VC-based multiplexing as defined in RFC 1483. An administrator sets this to match the encapsulation the far-end equipment (such as a DSLAM or ATM switch) expects for routed IP packets, since a mismatch would prevent the two ends from correctly parsing each other's frames. For example, setting this object to llcSnap(2) on a DSL interface configures the device to wrap upstream IP-routed packets in LLC/SNAP headers before transmission.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1
snmpwalk -v2c -c public <target> PDN-IF-EXT-CONFIG-MIB::pdnIfMultiprotocolEncapConfigIPRoutedPDUs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1.1
snmpget -v2c -c public <target> PDN-IF-EXT-CONFIG-MIB::pdnIfMultiprotocolEncapConfigIPRoutedPDUs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1.1 i <value>

Start monitoring Paradyne Networks access/DSL platform (extended interface link configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-IF-EXT-CONFIG-MIB::pdnIfMultiprotocolEncapConfigIPRoutedPDUs OID value, configure state conditions and alerts, and monitor any Paradyne Networks access/DSL platform (extended interface link configuration) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.12pdnIfExtPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.12.3pdnIfExtEncapConfigPDN-IF-EXT-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.6.12.3.1pdnIfMultiprotocolEncapConfigTablePDN-IF-EXT-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1pdnIfMultiprotocolEncapConfigEntryPDN-IF-EXT-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.6.12.3.1.1.1pdnIfMultiprotocolEncapConfigIPRoutedPDUsPDN-IF-EXT-CONFIG-MIB