PDN-CONFIG-MIB :: devCfgClkIfIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-CONFIG-MIB › devCfgClkIfIndex

devCfgClkIfIndex

Module: PDN-CONFIG-MIB

OID (symbolic): PDN-CONFIG-MIB::devCfgClkIfIndex

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to select the interface to be used as the source for the master clock for the device, if devCfgClkSource is set to interface(3). The interface selected provides synchronization for all the timing within the device, and the clocks for all of the external interfaces. NOTE: if a synchronous data port is selected and the EDL is enabled for that synchronous data port, then the external device must provide a clock 8 Kbps less than the expected data port rate. For example, if the data port rate is set at 64 Kbps, the external clock source needs to supply a 56 Kbps clock signal.

If devCfgClkSource is not interface(3), the value of this object is meaningless.

What is devCfgClkIfIndex?

The interface used as the master clock source when devCfgClkSource is set to interface; meaningless for any other clock source setting, and the admin must ensure the connected external device supplies a clock rate matched to the data port rate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3
snmpwalk -v2c -c public <target> PDN-CONFIG-MIB::devCfgClkIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3.1
snmpget -v2c -c public <target> PDN-CONFIG-MIB::devCfgClkIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3.1 i <value>

Start monitoring Paradyne xDSL access equipment (self-test/clock-source/config management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-CONFIG-MIB::devCfgClkIfIndex OID value, configure state conditions and alerts, and monitor any Paradyne xDSL access equipment (self-test/clock-source/config management) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.7pdn_devConfigPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.7.3devConfigClockSrcPDN-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.7.3.1devConfigClockSrcTablePDN-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.7.3.1.1devConfigClockSrcEntryPDN-CONFIG-MIB
1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3devCfgClkIfIndexPDN-CONFIG-MIB