All MIBs › PCE-PCEP-DRAFT-MIB › pcePcepSessionKeepAliveTime
pcePcepSessionKeepAliveTime
Module: PCE-PCEP-DRAFT-MIB
OID (symbolic): PCE-PCEP-DRAFT-MIB::pcePcepSessionKeepAliveTime
OID (numeric): 1.3.6.1.3.9999.1.3.3.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The negotiated KeepAlive Time which represents the amount of seconds between keep alive messages. The pcePcepClientKeepAliveHoldTimer related to this Session is the value that was proposed as the KeepAlive Time for this session.
This value is negotiated during session initialization between the entity's proposed value (i.e., the value configured in pcePcepClientKeepAliveHoldTimer) and the peer's proposed KeepAlive Hold Timer value. This value is the smaller of the two proposed values.
What is pcePcepSessionKeepAliveTime?
This read-only object reports the actual, negotiated keepalive interval in effect for this session, in seconds. It is derived by comparing the local client's proposed value in pcePcepClientKeepAliveTimer against the peer's own proposed keepalive hold timer and taking the smaller of the two, so it can differ from what the local client originally requested. If pcePcepClientKeepAliveTimer was configured as 60 seconds but the peer proposed 30, pcePcepSessionKeepAliveTime for that session would show 30, the value both ends actually settled on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.9999.1.3.3.1.4 snmpwalk -v2c -c public <target> PCE-PCEP-DRAFT-MIB::pcePcepSessionKeepAliveTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.9999.1.3.3.1.4.1 snmpget -v2c -c public <target> PCE-PCEP-DRAFT-MIB::pcePcepSessionKeepAliveTime.1
Start monitoring Network devices implementing PCEP (Path Computation Element Protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCE-PCEP-DRAFT-MIB::pcePcepSessionKeepAliveTime OID value, configure state conditions and alerts, and monitor any Network devices implementing PCEP (Path Computation Element Protocol) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.9999 | mplsCemMIB | MPLS-CEM-MIB |
| 1.3.6.1.3.9999.1 | mplsCemObjects | MPLS-CEM-MIB |
| 1.3.6.1.3.9999.1.3 | mplsCemVcPerfTable | MPLS-CEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.9999.1.3.3 | pcePcepSessionTable | PCE-PCEP-DRAFT-MIB |
| 1.3.6.1.3.9999.1.3.3.1 | pcePcepSessionEntry | PCE-PCEP-DRAFT-MIB |
| 1.3.6.1.3.9999.1.3.3.1.4 | pcePcepSessionKeepAliveTime | PCE-PCEP-DRAFT-MIB |