PANDATEL-FHFLS-MODEM-MIB

All MIBs › PANDATEL-FHFLS-MODEM-MIB

Category: Modems

Description: Manages Pandatel FHFLS series fiber-to-copper modem configuration, line status, and performance statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PANDATEL-FHFLS-MODEM-MIB?

PANDATEL-FHFLS-MODEM-MIB is a vendor-specific MIB from Pandatel for its FHFLS series fiber-to-copper (fiber/HDSL/leased-line) modem products, used to manage rack-mounted modem shelves and their individual modem cards. It exposes configuration data such as interface emulation mode, clock system and clock source, data rate, and remote access mode, organized per modem by rack and position (mdmRack, mdmPosition). Its monitoring value centers on the operational and configuration status of each modem card rather than deep performance counters, letting an operator confirm that a given modem's clocking, data rate, and interface settings match what the link requires and that the card is present and correctly identified in its slot. Because these are point-to-point line modems, dependency on higher-layer MIBs like IF-MIB is limited, with most status expressed through Pandatel's own fhflsModemTable. It is typically deployed in telecom access rooms where FHFLS modem racks extend copper interfaces (e.g. E1/serial) over fiber links. Engineers can download the PANDATEL-FHFLS-MODEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PANDATEL-FHFLS-MODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Pandatel FHFLS fiber-to-copper modem shelf/rack systems

Monitoring Examples

An administrator would poll fhflsModemTable/fhflsTableEntry for a given mdmRack/mdmPosition to read mdmModemName, mdmClockSource, and mdmDataRate, confirming that a modem is configured for the expected clock source (e.g. line vs. internal) and data rate. A mismatch between mdmInterfaceEmulationMode and the connected equipment, or an unexpected mdmRemoteAccessMode setting, would explain a link that trains but passes no traffic correctly.

What Can Be Monitored

modem presence per rack/position
modem name/identification
interface emulation mode
clock system and clock source
data rate
remote access mode

Imported Objects

From PANDATEL-MODEM-MIB

device-id
mdmSpecifics	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
fhfls	1.3.6.1.4.1.760.1.1.2.1.10.103
fhflsModemTable	1.3.6.1.4.1.760.1.1.2.1.10.103.1		not-accessible	The table of all FHFL-S modems in this housing.
fhflsTableEntry	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1		not-accessible	The index of the table.
INT mdmRack	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.1	INTEGER	read-only	The index of the rack where the modem is installed.
INT mdmModem	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.2	INTEGER	read-only	This variable displays the slot number where the corresponding modem is installed in the rack.
INT mdmPosition	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.3	INTEGER	read-only	This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.
STR mdmModemName	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.5	DisplayString	read-only	A verbal name of this modem.
INT mdmInterfaceEmulationMode	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.6	INTEGER	read-only	Interface mode of the unit: 'te' or 'nt'.
INT mdmModemProperty	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.7	INTEGER	read-only	The speed class of the unit: STM-1/OC-3.
INT mdmClockSystem	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.23	INTEGER	read-only	The clock system of the link.
INT mdmClockSource	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.24	INTEGER	read-only	The clock source of the link.
INT mdmDataRate	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.25	INTEGER	read-only	The data rate at the interface in bits per seconds.
INT mdmRemoteAccessMode	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.64	INTEGER	read-write	The possibility of remote management: 'enabled' or 'disabled'. Once disabled remote management, it is not possible to enable it at the remote unit.
INT mdmForcedRemoteAccess	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.65	INTEGER	read-write	Activation of remote management: 'on' or 'off'. Status 'on' enables management of remote unit. During this process the link is restricted to management data. The transmission of user data is interrupted. Status 'off' disables management of remote unit. The link transmits user data.
INT mdmClockRecovery	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.70	INTEGER	read-only	The clock recovery and data retiming at interface and line port.
INT mdmInterfaceAlarmCondition	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.98	INTEGER	read-write	The alarm trigger mode at interface port.
INT mdmLineAlarmCondition	1.3.6.1.4.1.760.1.1.2.1.10.103.1.1.99	INTEGER	read-write	The alarm trigger mode at line port.
fhfls_modem	1.3.6.1.4.1.760.1.1.2.1.10.10000.2.103

RFC description

PANDATEL management MIB for FHFL-S E1/T1 modem models in modular modem racks (vendor-private product MIB).

Start monitoring Pandatel FHFLS fiber-to-copper modem shelf/rack systems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PANDATEL-FHFLS-MODEM-MIB

What Is PANDATEL-FHFLS-MODEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description