All MIBs › PAIRGAIN-IISP-MIB › pgIISPNetPrefixStatus
pgIISPNetPrefixStatus
Module: PAIRGAIN-IISP-MIB
OID (symbolic): PAIRGAIN-IISP-MIB::pgIISPNetPrefixStatus
OID (numeric): 1.3.6.1.4.1.927.1.9.13.1.1.4.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: An indication of the validity of the network prefix for ATM addresses on the user side of the UNI port. To configure a new network prefix in this table, the network-side must set the appropriate instance of this object to the value valid(1). To delete an existing network prefix in this table, the network-side must set the appropriate instance of this object to the value invalid(2).
If circumstances occur on the user-side which cause a prefix to become invalid, the user-side modifies the value of the appropriate instance of this object to invalid(2).
Whenever the value of this object for a particular prefix becomes invalid(2), the conceptual row for that prefix may be removed from the table at any time, either immediately or subsequently.
What is pgIISPNetPrefixStatus?
This object indicates the validity of a network prefix on the user side of the UNI: setting it to valid(1) configures a new prefix into the table, while setting it to invalid(2) removes an existing one; the user-side also sets it to invalid(2) automatically if local circumstances make the prefix no longer valid, after which the row may be removed at any time. An admin explicitly sets valid(1) when provisioning a new address block for the UNI. Once set to invalid(2), the admin should expect the corresponding row to eventually disappear from the table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.927.1.9.13.1.1.4.1.7 snmpwalk -v2c -c public <target> PAIRGAIN-IISP-MIB::pgIISPNetPrefixStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.927.1.9.13.1.1.4.1.7.1 snmpget -v2c -c public <target> PAIRGAIN-IISP-MIB::pgIISPNetPrefixStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.927.1.9.13.1.1.4.1.7.1 i <value>
Start monitoring PairGain Technologies ATM signaling equipment (IISP routing status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PAIRGAIN-IISP-MIB::pgIISPNetPrefixStatus OID value, configure state conditions and alerts, and monitor any PairGain Technologies ATM signaling equipment (IISP routing status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.927 | pairgain | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1 | products | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1.9 | pgainDSLAM | PAIRGAIN-COMMON-HD-MIB |
| 1.3.6.1.4.1.927.1.9.13 | pgIISPMIB | PAIRGAIN-COMMON-HD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.927.1.9.13.1 | pgIISP | PAIRGAIN-IISP-MIB |
| 1.3.6.1.4.1.927.1.9.13.1.1 | pgIISPMIBObjects | PAIRGAIN-IISP-MIB |
| 1.3.6.1.4.1.927.1.9.13.1.1.4 | pgIISPNetPrefixTable | PAIRGAIN-IISP-MIB |
| 1.3.6.1.4.1.927.1.9.13.1.1.4.1 | pgIISPNetPrefixEntry | PAIRGAIN-IISP-MIB |
| 1.3.6.1.4.1.927.1.9.13.1.1.4.1.7 | pgIISPNetPrefixStatus | PAIRGAIN-IISP-MIB |