PACKETPOWER-EG4-MIB

All MIBs › PACKETPOWER-EG4-MIB

Category: UPS/Power

Description: Monitors power consumption, outlet status, and environmental sensors on PacketPower EG4 energy monitoring units.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PACKETPOWER-EG4-MIB?

PACKETPOWER-EG4-MIB is a vendor-specific SNMP module for PacketPower EG4-series energy/environmental monitoring units, devices typically installed in data center racks or power distribution units to track electrical load. It exposes time-stamped readings across all monitored channels of a node, covering power consumption, outlet-level status, and ambient environmental sensor data. Its monitoring purpose is almost entirely hardware-facing: it reports real-time power draw per outlet/channel and environmental conditions such as temperature or humidity around the monitored equipment, enabling detection of overload conditions, outlet failures, or environmental excursions in the data center. As a dedicated power-monitoring appliance MIB it has no strong dependency on other vendor MIBs beyond standard SNMP conventions. It is typically deployed on rack power strips or branch-circuit monitors in colocation and enterprise data centers for capacity planning and environmental compliance. Engineers can download the PACKETPOWER-EG4-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PACKETPOWER-EG4-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

PacketPower EG4 power/environmental monitoring unit
data center rack PDU sensor node

Monitoring Examples

No object/table names were available in the sample data beyond the module's stated purpose, so a specific object-level scenario cannot be grounded precisely; conceptually, an administrator would poll the per-channel, time-stamped reading table described in the module to trend power draw on each monitored outlet and flag a channel whose reading exceeds its rated capacity, indicating an at-risk circuit.

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
packetPower	1.3.6.1.4.1.33688
eg4	1.3.6.1.4.1.33688.4
readingsTable	1.3.6.1.4.1.33688.4.1		not-accessible	Table of most recent, time-stamped readings on all channels monitored by each node.
readingsEntry	1.3.6.1.4.1.33688.4.1.1		not-accessible	Time-stamped reading corresponding to a physical value most recently reported on a given measurement channel.
I32 reNodeId1	1.3.6.1.4.1.33688.4.1.1.1	Integer32	not-accessible	Node identifier, part 1 of 4 (16 bits, bits 63-48 of the id - part AAAA of AAAA-BBBB-CCCC-DDDD).
I32 reNodeId2	1.3.6.1.4.1.33688.4.1.1.2	Integer32	not-accessible	Node identifier, part 2 of 4 (16 bits, bits 47-32 of the id - part BBBB of AAAA-BBBB-CCCC-DDDD).
I32 reNodeId3	1.3.6.1.4.1.33688.4.1.1.3	Integer32	not-accessible	Node identifier, part 3 of 4 (16 bits, bits 31-16 of the id - part CCCC of AAAA-BBBB-CCCC-DDDD).
I32 reNodeId4	1.3.6.1.4.1.33688.4.1.1.4	Integer32	not-accessible	Node identifier, part 4 of 4 (16 bits, bits 15-0 of the id - part DDDD of AAAA-BBBB-CCCC-DDDD).
INT channelId	1.3.6.1.4.1.33688.4.1.1.5	INTEGER	not-accessible	Channel ID, indicating the type of measurement reported.
STR reNodeIdHex	1.3.6.1.4.1.33688.4.1.1.6	DisplayString	read-only	Node ID number as as 16-character uppercase hexadecimal string.
STR reNodeIdString	1.3.6.1.4.1.33688.4.1.1.7	DisplayString	read-only	Node identifier (hex), formatted XXXX-XXXX-XXXX-XXXX (matches all Packet Power product labels).
STR reChannelName	1.3.6.1.4.1.33688.4.1.1.8	DisplayString	read-only	Channel name, indicating channel type and instance (e.g.VoltageA).
DAT reTime	1.3.6.1.4.1.33688.4.1.1.9	DateAndTime	read-only	Timestamp of the reading.
I32 reUnixTime	1.3.6.1.4.1.33688.4.1.1.10	Integer32	read-only	Reading timestamp, UNIX epoch format.
STR reIso8601Time	1.3.6.1.4.1.33688.4.1.1.11	DisplayString	read-only	Reading timestamp, ISO8601 format.
I32 reValue	1.3.6.1.4.1.33688.4.1.1.12	Integer32	read-only	Reading value at timestamp.
STR reUnits	1.3.6.1.4.1.33688.4.1.1.13	DisplayString	read-only	Units of measure.
nodesTable	1.3.6.1.4.1.33688.4.2		not-accessible	Table of all active nodes.
nodesEntry	1.3.6.1.4.1.33688.4.2.1		not-accessible	Node status, including most recent activity time and radio link quality.
I32 ntNodeId1	1.3.6.1.4.1.33688.4.2.1.1	Integer32	not-accessible	Node identifier, part 1 of 4 (16 bits, bits 63-48 of the id - part AAAA of AAAA-BBBB-CCCC-DDDD).
I32 ntNodeId2	1.3.6.1.4.1.33688.4.2.1.2	Integer32	not-accessible	Node identifier, part 2 of 4 (16 bits, bits 47-32 of the id - part BBBB of AAAA-BBBB-CCCC-DDDD).
I32 ntNodeId3	1.3.6.1.4.1.33688.4.2.1.3	Integer32	not-accessible	Node identifier, part 3 of 4 (16 bits, bits 31-16 of the id - part CCCC of AAAA-BBBB-CCCC-DDDD).
I32 ntNodeId4	1.3.6.1.4.1.33688.4.2.1.4	Integer32	not-accessible	Node identifier, part 4 of 4 (16 bits, bits 15-0 of the id - part DDDD of AAAA-BBBB-CCCC-DDDD).
STR ntNodeIdHex	1.3.6.1.4.1.33688.4.2.1.5	DisplayString	read-only	Node ID number as as 16-character uppercase hexadecimal string.
STR ntNodeIdString	1.3.6.1.4.1.33688.4.2.1.6	DisplayString	read-only	Node identifier (hex), formatted XXXX-XXXX-XXXX-XXXX (matches all Packet Power product labels).
DAT ntTime	1.3.6.1.4.1.33688.4.2.1.7	DateAndTime	read-only	Timestamp of the most recent reading from the node.
I32 ntUnixTime	1.3.6.1.4.1.33688.4.2.1.8	Integer32	read-only	Timestamp of the most recent reading from the node, UNIX epoch format.
STR ntIso8601Time	1.3.6.1.4.1.33688.4.2.1.9	DisplayString	read-only	Timestamp of the most recent reading from the node, ISO8601 format.
I32 ntLinkQuality	1.3.6.1.4.1.33688.4.2.1.10	Integer32	read-only	Radio link quality 0..100

RFC description

Power and energy measurements from PacketPower EG4 devices with time-stamped readings across monitored channels.

Start monitoring PacketPower EG4 power/environmental monitoring unit, data center rack PDU sensor node with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PACKETPOWER-EG4-MIB

What Is PACKETPOWER-EG4-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description