All MIBs › OMNITEK-MIB
Category: Video/Broadcast
Description: Provides SNMP management objects for Omnitek UK video and broadcast test and measurement equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is OMNITEK-MIB?
OMNITEK-MIB is a vendor enterprise MIB providing SNMP management objects for Omnitek (UK) video and broadcast test and measurement equipment, used to configure and monitor specialized video signal analysis and generation hardware. Given the absence of module description or sample objects, its exact object structure cannot be confirmed, but such broadcast test-equipment MIBs typically expose device configuration, signal/test status, and hardware health indicators. In general, monitoring MIBs for this class of equipment cover things like unit uptime, module/card presence, and operational/alarm status of the video processing hardware. No explicit dependency information is available from the provided context. It would be deployed in broadcast facilities, video production environments, or test labs using Omnitek analyzers/generators. Engineers can download the OMNITEK-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in OMNITEK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Omnitek video/broadcast test and measurement equipment
Monitoring Examples
No sample_objects or module_desc are provided for this MIB, so no concrete object names or monitoring scenario can be given; this description is inferred generally from the vendor's product category (broadcast test and measurement equipment) rather than confirmed MIB content.
This MIB depends on
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Integer32 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| omnitek | 1.3.6.1.4.1.18458 | |||
| NTF systemUpTRAP | 1.3.6.1.4.1.18458.0.1 | This trap is generated when the Omnitek software connects to the SNMP service. | ||
| NTF systemDownTRAP | 1.3.6.1.4.1.18458.0.2 | This trap is generated when the SNMP service loses contact with the Omnitek software. | ||
| videostatus | 1.3.6.1.4.1.18458.1 | |||
| NTF videoStandardChangedTRAP | 1.3.6.1.4.1.18458.1.0.3 | This trap is generated when the video standard is changed on the OmniTek card. | ||
| NTF digitalInputTRAP | 1.3.6.1.4.1.18458.1.0.4 | Digital input present (1) or not (0). | ||
| NTF digitalInputBTRAP | 1.3.6.1.4.1.18458.1.0.5 | Digital input link B present (1) or not (0). | ||
| NTF motionContentTRAP | 1.3.6.1.4.1.18458.1.0.6 | This trap is generated when the input video freezes. | ||
| NTF lumaContentTRAP | 1.3.6.1.4.1.18458.1.0.7 | This trap is generated when the input video loses its luminance component. | ||
| NTF chromaContentTRAP | 1.3.6.1.4.1.18458.1.0.8 | This trap is generated when the input video loses its chrominance component. | ||
| NTF syncStatusTRAP | 1.3.6.1.4.1.18458.1.0.9 | This trap is generated when the sync status changes. | ||
| INT videoStandard | 1.3.6.1.4.1.18458.1.1 | INTEGER | read-write | The current video standard. |
| INT digitalInput | 1.3.6.1.4.1.18458.1.2 | INTEGER | read-only | Digital input detect state. |
| INT digitalInputB | 1.3.6.1.4.1.18458.1.3 | INTEGER | read-only | Digital input detect state for link B (dual-link cards only). |
| INT motionContent | 1.3.6.1.4.1.18458.1.4 | INTEGER | read-only | Motion content (frozen (false)/active (true)). |
| INT lumaContent | 1.3.6.1.4.1.18458.1.5 | INTEGER | read-only | Set when the input to the analyzer has luminance. |
| INT chromaContent | 1.3.6.1.4.1.18458.1.6 | INTEGER | read-only | Set when the input to the analyzer has chrominance. |
| INT syncStatus | 1.3.6.1.4.1.18458.1.7 | INTEGER | read-only | Status of the external sync input. |
| videoindex | 1.3.6.1.4.1.18458.2 | |||
| STR activeFormat | 1.3.6.1.4.1.18458.2.1 | DisplayString | read-only | A description of the Video Index active format (SD ONLY). Can be one of the following: Not Present Active region is same as Coded Frame 4:3 16:9 14:9 Reserved (4) 4:3 with shoot-and-protect 14:9 centre 16:9 with shoot-and-protect 14:9 centre 16:9 with shoot-and-protect 4:3 centre |
| STR codedFrame | 1.3.6.1.4.1.18458.2.2 | DisplayString | read-only | A description of the Video Index coded frame format (SD ONLY). Can be one of the following: Not Present No Information 525/59.94 - 4:3 625/50 - 4:3 Reserved (3) Reserved (4) 525/59.94 - 16:9 625/50 - 16:9 Reserved (7) |
| STR componentSet | 1.3.6.1.4.1.18458.2.3 | DisplayString | read-only | A description of the Video Index component set (SD ONLY). Can be one of the following: Not Present No Information RGB YCbCr YUV Monochrome NTSC PAL PAL-M SECAM Reserved (9) Reserved (10) Reserved (11) Reserved (12) Reserved (13) Reserved (14) Reserved (15) |
| STR sampleStructure | 1.3.6.1.4.1.18458.2.4 | DisplayString | read-only | Description of the Video Index sample structure (SD ONLY). Can be one of the following: Not Present No Information 4:0:0 4:2:2 4:2:2:4, Main 4:2:2:4, Sub 4:4:4, Main 4:4:4, Sub 4:4:4:4, Main 4:4:4:4, Sub 4:2:2 Progressive, Main 4:2:2 Progressive, Sub 4:2:0 Progressive 8:4:4, Main 8:4:4, Sub 4:2:2:4, Single Link Reserved (15) |
| wss | 1.3.6.1.4.1.18458.3 | |||
| INT wssReadType | 1.3.6.1.4.1.18458.3.1 | INTEGER | read-write | Read type of Wide-Screen Signalling information. |
| STR aspectRatioEN300294 | 1.3.6.1.4.1.18458.3.2 | DisplayString | read-only | Description of Wide-Screen Signalling aspect ratio (EN300294). Can be one of the following: Not Present 4:3 Full Format 14:9 Letterbox Center 14:9 Letterbox Top 16:9 Letterbox Center 16:9 Letterbox Top > 16:9 Letterbox Center 14:9 Full Format Center 16:9 Full Format (Anamorphic) Unknown |
| STR enhancedServicesEN300294 | 1.3.6.1.4.1.18458.3.3 | DisplayString | read-only | Description of Wide-Screen Signalling enhanced services (EN300294). Value returned will be 'Not Present' or a binary string from '0000' to '1111' |
| STR subtitlesEN300294 | 1.3.6.1.4.1.18458.3.4 | DisplayString | read-only | Description of Wide-Screen Signalling subtitles (EN300294). Value returned will be 'Not Present' or a binary string from '000' to '111' |
| STR othersEN300294 | 1.3.6.1.4.1.18458.3.5 | DisplayString | read-only | Description of Wide-Screen Signalling others field (EN300294). Value returned will be 'Not Present' or a binary string from '000' to '111' |
| STR aspectRatioARDSPEC | 1.3.6.1.4.1.18458.3.6 | DisplayString | read-only | Description of Wide-Screen Signalling aspect ratio field (ARDSPEC). Can be one of the following: Not Present No Information 525/59.94 4x3 625/50 4x3 Reserved (3) Reserved (4) 525/59.94 16x9 625/50 16x9 Reserved (7) |
| STR activeFormatARDSPEC | 1.3.6.1.4.1.18458.3.7 | DisplayString | read-only | Description of Wide-Screen Signalling active format field (ARDSPEC). Can be one of the following: Not Present Active Picture Same As Coded Raster 4x3 16x9 14x9 Reserved (4) 4x3 With Shoot-And-Protect 14x9 Centre 16x9 With Shoot-And-Protect 14x9 Centre Reserved (7) |
| STR parityBitsARDSPEC | 1.3.6.1.4.1.18458.3.8 | DisplayString | read-only | Description of Wide-Screen Signalling parity bits field (ARDSPEC). Value returned will be 'Not Present' or a binary string from '00' to '11' |
| STR enhancedServicesARDSPEC | 1.3.6.1.4.1.18458.3.9 | DisplayString | read-only | Description of Wide-Screen Signalling enhanced services (ARDSPEC). Value returned will be 'Not Present' or a binary string from '0000' to '1111' |
| STR reservedARDSPEC | 1.3.6.1.4.1.18458.3.10 | DisplayString | read-only | Description of Wide-Screen Signalling reserved field (ARDSPEC). Value returned will be 'Not Present' or a binary string from '00' to '11' |
| teletext | 1.3.6.1.4.1.18458.4 | |||
| INT present | 1.3.6.1.4.1.18458.4.1 | INTEGER | read-only | Whether teletext is present on the input. |
| closedcaptions | 1.3.6.1.4.1.18458.5 | |||
| INT closedCaptionAnc608 | 1.3.6.1.4.1.18458.5.1 | INTEGER | read-only | Whether Closed Captioning is present on the input (ANC 608). |
| INT closedCaptionAnc708 | 1.3.6.1.4.1.18458.5.2 | INTEGER | read-only | Whether Closed Captioning is present on the input (ANC 708). |
| INT closedCaptionLine21 | 1.3.6.1.4.1.18458.5.3 | INTEGER | read-only | Whether Closed Captioning is present on the input (Line 21). |
| errors | 1.3.6.1.4.1.18458.6 | |||
| NTF crcErrorsTRAP | 1.3.6.1.4.1.18458.6.0.10 | This trap is generated when a video CRC error is detected. | ||
| NTF crcBErrorsTRAP | 1.3.6.1.4.1.18458.6.0.11 | This trap is generated when a video CRC error is detected. | ||
| NTF rgbRangeErrorsTRAP | 1.3.6.1.4.1.18458.6.0.12 | This trap is generated when a video RGB range error is detected. | ||
| NTF ycbcrRangeErrorsTRAP | 1.3.6.1.4.1.18458.6.0.13 | This trap is generated when a video YCbCr range error is detected. | ||
| NTF trsErrorsTRAP | 1.3.6.1.4.1.18458.6.0.14 | This trap is generated when a video TRS error is detected. | ||
| NTF trsBErrorsTRAP | 1.3.6.1.4.1.18458.6.0.15 | This trap is generated when a video TRS error is detected. | ||
| NTF ancErrorsTRAP | 1.3.6.1.4.1.18458.6.0.16 | This trap is generated when a video ANC error is detected. | ||
| NTF ancBErrorsTRAP | 1.3.6.1.4.1.18458.6.0.17 | This trap is generated when a video ANC error is detected. | ||
| NTF lineErrorsTRAP | 1.3.6.1.4.1.18458.6.0.18 | This trap is generated when a video line number error is detected. | ||
| NTF lineBErrorsTRAP | 1.3.6.1.4.1.18458.6.0.19 | This trap is generated when a video line number error is detected. | ||
| NTF frozenVITCTRAP | 1.3.6.1.4.1.18458.6.0.20 | This trap is generated when a VITC frozen error is detected. THIS TRAP NOT CURRENTLY IMPLEMENTED | ||
| NTF skippedVITCTRAP | 1.3.6.1.4.1.18458.6.0.21 | This trap is generated when a VITC skipped error is detected. THIS TRAP NOT CURRENTLY IMPLEMENTED | ||
| NTF frozenATCTRAP | 1.3.6.1.4.1.18458.6.0.22 | This trap is generated when a ATC frozen error is detected. THIS TRAP NOT CURRENTLY IMPLEMENTED | ||
| NTF skippedATCTRAP | 1.3.6.1.4.1.18458.6.0.23 | This trap is generated when a ATC skipped error is detected. THIS TRAP NOT CURRENTLY IMPLEMENTED | ||
| NTF compRangeErrorsTRAP | 1.3.6.1.4.1.18458.6.0.24 | This trap is generated when a video Composite range error is detected. | ||
| NTF edhErrorTRAP | 1.3.6.1.4.1.18458.6.0.25 | This trap is generated when a video EDH error is detected. | ||
| NTF edhInvalidTRAP | 1.3.6.1.4.1.18458.6.0.26 | This trap is generated when a video EDH invalid is detected. | ||
| I32 crcErrors | 1.3.6.1.4.1.18458.6.1 | Integer32 | read-write | Number of video CRC errors. Set to 0 to reset counter (resets link b counter on dual-link cards also). |
| I32 crcBErrors | 1.3.6.1.4.1.18458.6.2 | Integer32 | read-write | Number of video CRC errors for link b (dual-link cards only). Set to 0 to reset counter (resets link a counter also) |
| I32 rgbRangeErrors | 1.3.6.1.4.1.18458.6.3 | Integer32 | read-write | Number of video RGB range errors. Set to 0 to reset counter. |
| I32 rgbRangeMin | 1.3.6.1.4.1.18458.6.4 | Integer32 | read-write | The minimum value of the accepted RGB range. |
| I32 rgbRangeMax | 1.3.6.1.4.1.18458.6.5 | Integer32 | read-write | The maximum value of the accepted RGB range. |
| I32 ycbcrRangeErrors | 1.3.6.1.4.1.18458.6.6 | Integer32 | read-write | Number of video YCbCr range errors. Set to 0 to reset counter |
| I32 yRangeMin | 1.3.6.1.4.1.18458.6.7 | Integer32 | read-write | The minimum value of the accepted video Y data before a YCbCr range error is flagged. |
| I32 yRrangeMax | 1.3.6.1.4.1.18458.6.8 | Integer32 | read-write | The maximum value of the accepted video Y data before a YCbCr range error is flagged. |
| I32 uRangeMin | 1.3.6.1.4.1.18458.6.9 | Integer32 | read-write | The minimum value of the accepted video U data before a YCbCr range error is flagged. |
| I32 uRangeMax | 1.3.6.1.4.1.18458.6.10 | Integer32 | read-write | The maximum value of the accepted video U data before a YCbCr range error is flagged. |
| I32 vRangeMin | 1.3.6.1.4.1.18458.6.11 | Integer32 | read-write | The minimum value of the accepted video V data before a YCbCr range error is flagged. |
| I32 vRangeMax | 1.3.6.1.4.1.18458.6.12 | Integer32 | read-write | The maximum value of the accepted video V data before a YCbCr range error is flagged. |
| I32 trsErrors | 1.3.6.1.4.1.18458.6.13 | Integer32 | read-write | Number of TRS errors. Set to 0 to reset counter (resets link b counter on dual-link cards also) |
| I32 trsBErrors | 1.3.6.1.4.1.18458.6.14 | Integer32 | read-write | Number of TRS errors for link b (dual-link cards only). Set to 0 to reset counter (resets link a counter also) |
| I32 ancErrors | 1.3.6.1.4.1.18458.6.15 | Integer32 | read-write | Number of ANC errors. Set to 0 to reset counter (resets link b counter on dual-link cards also) |
| I32 ancBErrors | 1.3.6.1.4.1.18458.6.16 | Integer32 | read-write | Number of ANC errors for link b (dual-link cards only). Set to 0 to reset counter (resets link a counter also) |
| I32 lineErrors | 1.3.6.1.4.1.18458.6.17 | Integer32 | read-write | Number of line number errors. Set to 0 to reset counter (resets link b counter on dual-link cards also) |
| I32 lineBErrors | 1.3.6.1.4.1.18458.6.18 | Integer32 | read-write | Number of line number errors for link b (dual-link cards only). Set to 0 to reset counter (resets link a counter also) |
| I32 frozenVITC | 1.3.6.1.4.1.18458.6.19 | Integer32 | read-write | Number of frozen VITC errors. Set to 0 to reset counter. NOT CURRENTLY IMPLEMENTED. |
| I32 skippedVITC | 1.3.6.1.4.1.18458.6.20 | Integer32 | read-write | Number of skipped VITC errors. Set to 0 to reset counter. NOT CURRENTLY IMPLEMENTED. |
| I32 frozenATC | 1.3.6.1.4.1.18458.6.21 | Integer32 | read-write | Number of frozen ATC errors. Set to 0 to reset counter. NOT CURRENTLY IMPLEMENTED. |
| I32 skippedATC | 1.3.6.1.4.1.18458.6.22 | Integer32 | read-write | Number of skipped ATC errors. Set to 0 to reset counter. NOT CURRENTLY IMPLEMENTED. |
| I32 compRangeErrors | 1.3.6.1.4.1.18458.6.23 | Integer32 | read-write | Number of Composite range errors. Set to 0 to reset counter |
| I32 compRangeMin | 1.3.6.1.4.1.18458.6.24 | Integer32 | read-write | |
| I32 compRangeMax | 1.3.6.1.4.1.18458.6.25 | Integer32 | read-write | |
| I32 edhError | 1.3.6.1.4.1.18458.6.26 | Integer32 | read-write | Number of video EDH errors. Set to 0 to reset counter. |
| I32 edhInvalid | 1.3.6.1.4.1.18458.6.27 | Integer32 | read-write | Video EDH invalid counter. Set to 0 to reset counter. |
| timecode | 1.3.6.1.4.1.18458.7 | |||
| STR vitc | 1.3.6.1.4.1.18458.7.1 | DisplayString | read-only | VITC timecode of input (SD ONLY). |
| STR atc | 1.3.6.1.4.1.18458.7.2 | DisplayString | read-only | ATC timecode of input. |
| audio | 1.3.6.1.4.1.18458.8 | |||
| STR usageGroup1 | 1.3.6.1.4.1.18458.8.1 | DisplayString | read-only | The audio usage string for audio group 1 . NOT IMPLEMENTED YET |
| STR usageGroup2 | 1.3.6.1.4.1.18458.8.2 | DisplayString | read-only | The audio usage string for audio group 2 . NOT IMPLEMENTED YET |
| STR usageGroup3 | 1.3.6.1.4.1.18458.8.3 | DisplayString | read-only | The audio usage string for audio group 3 . NOT IMPLEMENTED YET |
| STR usageGroup4 | 1.3.6.1.4.1.18458.8.4 | DisplayString | read-only | The audio usage string for audio group 4 . NOT IMPLEMENTED YET |
| INT sampleGroup1 | 1.3.6.1.4.1.18458.8.5 | INTEGER | read-only | Whether audio packets contain audio/data in group 1. NOT IMPLEMENTED YET |
| INT sampleGroup2 | 1.3.6.1.4.1.18458.8.6 | INTEGER | read-only | Whether audio packets contain audio/data in group 2. NOT IMPLEMENTED YET |
| INT sampleGroup3 | 1.3.6.1.4.1.18458.8.7 | INTEGER | read-only | Whether audio packets contain audio/data in group 3. NOT IMPLEMENTED YET |
| INT sampleGroup4 | 1.3.6.1.4.1.18458.8.8 | INTEGER | read-only | Whether audio packets contain audio/data in group 4. NOT IMPLEMENTED YET |
| INT emphasisGroup1 | 1.3.6.1.4.1.18458.8.9 | INTEGER | read-only | Whether audio emphasis is present in audio group 1. NOT IMPLEMENTED YET |
| INT emphasisGroup2 | 1.3.6.1.4.1.18458.8.10 | INTEGER | read-only | Whether audio emphasis is present in audio group 2. NOT IMPLEMENTED YET |
| INT emphasisGroup3 | 1.3.6.1.4.1.18458.8.11 | INTEGER | read-only | Whether audio emphasis is present in audio group 3. NOT IMPLEMENTED YET |
| INT emphasisGroup4 | 1.3.6.1.4.1.18458.8.12 | INTEGER | read-only | Whether audio emphasis is present in audio group 4. NOT IMPLEMENTED YET |
| INT lockGroup1 | 1.3.6.1.4.1.18458.8.13 | INTEGER | read-only | Whether audio group 1 is locked. NOT IMPLEMENTED YET |
| INT lockGroup2 | 1.3.6.1.4.1.18458.8.14 | INTEGER | read-only | Whether audio group 2 is locked. NOT IMPLEMENTED YET |
| INT lockGroup3 | 1.3.6.1.4.1.18458.8.15 | INTEGER | read-only | Whether audio group 3 is locked. NOT IMPLEMENTED YET |
| INT lockGroup4 | 1.3.6.1.4.1.18458.8.16 | INTEGER | read-only | Whether audio group 4 is locked. NOT IMPLEMENTED YET |
| INT frequencyGroup1 | 1.3.6.1.4.1.18458.8.17 | INTEGER | read-only | Sample frequency of audio in group 1. NOT IMPLEMENTED YET |
| INT frequencyGroup2 | 1.3.6.1.4.1.18458.8.18 | INTEGER | read-only | Sample frequency of audio in group 2. NOT IMPLEMENTED YET |
| INT frequencyGroup3 | 1.3.6.1.4.1.18458.8.19 | INTEGER | read-only | Sample frequency of audio in group 3. NOT IMPLEMENTED YET |
| INT frequencyGroup4 | 1.3.6.1.4.1.18458.8.20 | INTEGER | read-only | Sample frequency of audio in group 4. NOT IMPLEMENTED YET |
| INT channelModeGroup1 | 1.3.6.1.4.1.18458.8.21 | INTEGER | read-only | Channel mode of audio group 1. NOT IMPLEMENTED YET |
| INT channelModeGroup2 | 1.3.6.1.4.1.18458.8.22 | INTEGER | read-only | Channel mode of audio group 2. NOT IMPLEMENTED YET |
| INT channelModeGroup3 | 1.3.6.1.4.1.18458.8.23 | INTEGER | read-only | Channel mode of audio group 3. NOT IMPLEMENTED YET |
| INT channelModeGroup4 | 1.3.6.1.4.1.18458.8.24 | INTEGER | read-only | Channel mode of audio group 4. NOT IMPLEMENTED YET |
| INT wordLengthGroup1 | 1.3.6.1.4.1.18458.8.25 | INTEGER | read-only | Word length of data in audio group 1. NOT IMPLEMENTED YET |
| INT wordLengthGroup2 | 1.3.6.1.4.1.18458.8.26 | INTEGER | read-only | Word length of data in audio group 2. NOT IMPLEMENTED YET |
| INT wordLengthGroup3 | 1.3.6.1.4.1.18458.8.27 | INTEGER | read-only | Word length of data in audio group 3. NOT IMPLEMENTED YET |
| INT wordLengthGroup4 | 1.3.6.1.4.1.18458.8.28 | INTEGER | read-only | Word length of data in audio group 4. NOT IMPLEMENTED YET |
| AUD channelStatus1 | 1.3.6.1.4.1.18458.8.29 | AudioStatus | read-only | Channel 1 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus2 | 1.3.6.1.4.1.18458.8.30 | AudioStatus | read-only | Channel 2 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus3 | 1.3.6.1.4.1.18458.8.31 | AudioStatus | read-only | Channel 3 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus4 | 1.3.6.1.4.1.18458.8.32 | AudioStatus | read-only | Channel 4 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus5 | 1.3.6.1.4.1.18458.8.33 | AudioStatus | read-only | Channel 5 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus6 | 1.3.6.1.4.1.18458.8.34 | AudioStatus | read-only | Channel 6 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus7 | 1.3.6.1.4.1.18458.8.35 | AudioStatus | read-only | Channel 7 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus8 | 1.3.6.1.4.1.18458.8.36 | AudioStatus | read-only | Channel 8 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus9 | 1.3.6.1.4.1.18458.8.37 | AudioStatus | read-only | Channel 9 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus10 | 1.3.6.1.4.1.18458.8.38 | AudioStatus | read-only | Channel 10 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus11 | 1.3.6.1.4.1.18458.8.39 | AudioStatus | read-only | Channel 11 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus12 | 1.3.6.1.4.1.18458.8.40 | AudioStatus | read-only | Channel 12 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus13 | 1.3.6.1.4.1.18458.8.41 | AudioStatus | read-only | Channel 13 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus14 | 1.3.6.1.4.1.18458.8.42 | AudioStatus | read-only | Channel 14 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus15 | 1.3.6.1.4.1.18458.8.43 | AudioStatus | read-only | Channel 15 audio status. NOT IMPLEMENTED YET |
| AUD channelStatus16 | 1.3.6.1.4.1.18458.8.44 | AudioStatus | read-only | Channel 16 audio status. NOT IMPLEMENTED YET |
| I32 audioMin | 1.3.6.1.4.1.18458.8.45 | Integer32 | read-only | Audio level below which is deemed silence. NOT IMPLEMENTED YET |
| I32 audioMax | 1.3.6.1.4.1.18458.8.46 | Integer32 | read-only | Audio level above which is deemed peak. NOT IMPLEMENTED YET |
| logging | 1.3.6.1.4.1.18458.9 | |||
| STR jobId | 1.3.6.1.4.1.18458.9.1 | DisplayString | read-write | The current logging jobId - NULL if not logging. NOT IMPLEMENTED YET |
| generator | 1.3.6.1.4.1.18458.10 | |||
| I32 indexPattern | 1.3.6.1.4.1.18458.10.1 | Integer32 | write-only | Go to a specific pattern in the 'palette'. If the index is = nPatterns, the last pattern will be selected |
| I32 nextPattern | 1.3.6.1.4.1.18458.10.2 | Integer32 | write-only | Go to next pattern in 'palette'. If reached end of palette, go back to pattern 0. Must be > 0 |
| I32 prevPattern | 1.3.6.1.4.1.18458.10.3 | Integer32 | write-only | Go to previous pattern in 'palette'. If reached pattern 0, go to last pattern in palette. Must be > 0 |
| I32 transportToStart | 1.3.6.1.4.1.18458.10.4 | Integer32 | write-only | Set this object to anything other than 0 to go to first frame of currently selected sequence/playlist (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportJogBack | 1.3.6.1.4.1.18458.10.5 | Integer32 | write-only | Set this object to anything other than 0 to go to the previous frame of currently selected sequence/playlist (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportPlayReverse | 1.3.6.1.4.1.18458.10.6 | Integer32 | read-write | Determine whether the currently selected pattern/playlist is playing in reverse (if the currently selected pattern is not a sequence/playlist, this value will return 0). You can set this value to anything other than 0 to play the currently selected sequence/playlist in reverse (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportStop | 1.3.6.1.4.1.18458.10.7 | Integer32 | read-write | Determine whether the currently selected pattern/playlist is stopped (if the currently selected pattern is not a sequence/playlist, this value will return 0). You can set this value to anything other than 0 to play the currently selected sequence/playlist in reverse (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportPlayForward | 1.3.6.1.4.1.18458.10.8 | Integer32 | read-write | Determine whether the currently selected pattern/playlist is playing forward (if the currently selected pattern is not a sequence/playlist, this value will return 0). You can set this value to anything other than 0 to play the currently selected sequence/playlist forward (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportJogNext | 1.3.6.1.4.1.18458.10.9 | Integer32 | write-only | Set this object to anything other than 0 to go to the next frame of currently selected sequence/playlist (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportToEnd | 1.3.6.1.4.1.18458.10.10 | Integer32 | write-only | Set this object to anything other than 0 to go to the last frame of currently selected sequence/playlist (this will have no effect if a non-sequence pattern is selected in the configuration). |
| I32 transportLoop | 1.3.6.1.4.1.18458.10.11 | Integer32 | read-write | Determine whether the currently selected pattern/playlist is looped (if the currently selected pattern is not a sequence/playlist, this value will return 0). You can set this value to 0 to disable loop, or anything other than 0 to loop the currently selected sequence/playlist (this will have no effect if a non-sequence pattern is selected in the configuration). |
RFC description
Video monitoring and status MIB for audio, video, timecode, and broadcast stream analysis.
Start monitoring Omnitek (UK) video/broadcast test and measurement equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.