OMNI-gx2RX200-MIB :: rxhourMeter

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › OMNI-gx2RX200-MIB › rxhourMeter

rxhourMeter

Module: OMNI-gx2RX200-MIB

OID (symbolic): OMNI-gx2RX200-MIB::rxhourMeter

OID (numeric): 1.3.6.1.4.1.1166.6.1.2.6.5.4.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object provides the hour meter reading of the module.

What is rxhourMeter?

Read-only integer giving the cumulative number of operating hours the receiver module has logged, similar to an odometer reading used to track hardware age and wear.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.6.5.4.9
snmpwalk -v2c -c public <target> OMNI-gx2RX200-MIB::rxhourMeter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.6.5.4.9.1
snmpget -v2c -c public <target> OMNI-gx2RX200-MIB::rxhourMeter.1

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200 200 MHz optical receiver card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RX200-MIB::rxhourMeter OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200 200 MHz optical receiver card) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.6motproxiesBCS-IDENT-MIB
1.3.6.1.4.1.1166.6.1hfcGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2hfcDevicesGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2.6gx2Rx200GX2HFC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.6.1.2.6.5gx2Rx200FactoryTableOMNI-gx2RX200-MIB
1.3.6.1.4.1.1166.6.1.2.6.5.4gx2Rx200FactoryEntryOMNI-gx2RX200-MIB
1.3.6.1.4.1.1166.6.1.2.6.5.4.9rxhourMeterOMNI-gx2RX200-MIB

Module

This MIB depends on