All MIBs › OMNI-gx2RX200-MIB › rxgx2Rx200HoldTimeData
rxgx2Rx200HoldTimeData
Module: OMNI-gx2RX200-MIB
OID (symbolic): OMNI-gx2RX200-MIB::rxgx2Rx200HoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.6.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is rxgx2Rx200HoldTimeData?
Read-write integer setting the hold time, from 0 to 1300 seconds, used to suppress noise on the module's analog alarm objects before an alarm is actually raised. Increasing it prevents a brief, transient excursion in a reading from generating a nuisance alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.6.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2RX200-MIB::rxgx2Rx200HoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.6.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2RX200-MIB::rxgx2Rx200HoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.6.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200 200 MHz optical receiver card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RX200-MIB::rxgx2Rx200HoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200 200 MHz optical receiver card) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.6 | gx2Rx200 | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.6.6 | gx2Rx200HoldTimeTable | OMNI-gx2RX200-MIB |
| 1.3.6.1.4.1.1166.6.1.2.6.6.5 | gx2Rx200HoldTimeEntry | OMNI-gx2RX200-MIB |
| 1.3.6.1.4.1.1166.6.1.2.6.6.5.3 | rxgx2Rx200HoldTimeData | OMNI-gx2RX200-MIB |