Novell-LANalyzer-TR-MIB :: tokenRingHistoryIntervalStart

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Novell-LANalyzer-TR-MIB › tokenRingHistoryIntervalStart

tokenRingHistoryIntervalStart

Module: Novell-LANalyzer-TR-MIB

OID (symbolic): Novell-LANalyzer-TR-MIB::tokenRingHistoryIntervalStart

OID (numeric): 1.3.6.1.4.1.23.2.15.2.1.1.3

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-only

Description: The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.

What is tokenRingHistoryIntervalStart?

The value of sysUpTime at the start of the interval this sample covers; a probe that tracks time-of-day should align the first sample so later samples land on hour boundaries, and the interval currently being collected is not visible in this table until it completes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23.2.15.2.1.1.3
snmpwalk -v2c -c public <target> Novell-LANalyzer-TR-MIB::tokenRingHistoryIntervalStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23.2.15.2.1.1.3.1
snmpget -v2c -c public <target> Novell-LANalyzer-TR-MIB::tokenRingHistoryIntervalStart.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tokenRingHistoryIntervalStart.1

Start monitoring Novell LANalyzer network probe/analyzer (Token Ring segment statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Novell-LANalyzer-TR-MIB::tokenRingHistoryIntervalStart OID value, configure state conditions and alerts, and monitor any Novell LANalyzer network probe/analyzer (Token Ring segment statistics) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.23excelanCMU-MIB
1.3.6.1.4.1.23.2genericGroupFASTPATH-MIB
Numeric OIDNameModule
1.3.6.1.4.1.23.2.15ringrmon_mibNovell-LANalyzer-TR-MIB
1.3.6.1.4.1.23.2.15.2tokenRingHistoryNovell-LANalyzer-TR-MIB
1.3.6.1.4.1.23.2.15.2.1tokenRingHistoryTableNovell-LANalyzer-TR-MIB
1.3.6.1.4.1.23.2.15.2.1.1tokenRingHistoryEntryNovell-LANalyzer-TR-MIB
1.3.6.1.4.1.23.2.15.2.1.1.3tokenRingHistoryIntervalStartNovell-LANalyzer-TR-MIB