All MIBs › Nortel-MsCarrier-MscPassport-AtmIispMIB › mscAtmIfVptIispSigVcdTrafficShaping
mscAtmIfVptIispSigVcdTrafficShaping
Module: Nortel-MsCarrier-MscPassport-AtmIispMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigVcdTrafficShaping
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components.
When disabled is selected, traffic shaping for this connection is disabled.
What is mscAtmIfVptIispSigVcdTrafficShaping?
Controls whether outgoing traffic on this connection is shaped: disabled (no shaping, the default) or sameAsCa (inherit the trafficShaping setting from the connection's service-category component under the interface's Connection Administrator). Leave it at sameAsCa when you want centrally managed shaping policy rather than a per-connection override.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigVcdTrafficShaping
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigVcdTrafficShaping.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50.1 i <value>
Start monitoring Nortel MSC Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigVcdTrafficShaping OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport ATM switch (IISP inter-switch signaling) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.6 | mscAtmIfVptIisp | Nortel-MsCarrier-MscPassport-AtmIispMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.6.3 | mscAtmIfVptIispSig | Nortel-MsCarrier-MscPassport-AtmIispMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2 | mscAtmIfVptIispSigVcd | Nortel-MsCarrier-MscPassport-AtmIispMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10 | mscAtmIfVptIispSigVcdProvTable | Nortel-MsCarrier-MscPassport-AtmIispMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1 | mscAtmIfVptIispSigVcdProvEntry | Nortel-MsCarrier-MscPassport-AtmIispMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.6.3.2.10.1.50 | mscAtmIfVptIispSigVcdTrafficShaping | Nortel-MsCarrier-MscPassport-AtmIispMIB |