Nortel-MsCarrier-MscPassport-AtmIispMIB :: mscAtmIfVptIispSigLastTxDiagCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmIispMIB › mscAtmIfVptIispSigLastTxDiagCode

mscAtmIfVptIispSigLastTxDiagCode

Module: Nortel-MsCarrier-MscPassport-AtmIispMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigLastTxDiagCode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.2

Node type: OBJECT-TYPE

Type: Hex

Access: read-only

Description: This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.

What is mscAtmIfVptIispSigLastTxDiagCode?

The diagnostic code accompanying the last transmitted signalling message's cause code, present only when the signalling protocol detected a procedural error (identifying an information-element or timer type); it reads 0 if there was no failure. Pair it with SigLastTxCauseCode for a fuller picture of a signalling error this end reported.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigLastTxDiagCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigLastTxDiagCode.1

Start monitoring Nortel MSC Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfVptIispSigLastTxDiagCode OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport ATM switch (IISP inter-switch signaling) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9mscAtmIfVptNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.9.6mscAtmIfVptIispNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.9.6.3mscAtmIfVptIispSigNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.9.6.3.12mscAtmIfVptIispSigOperTableNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1mscAtmIfVptIispSigOperEntryNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.9.6.3.12.1.2mscAtmIfVptIispSigLastTxDiagCodeNortel-MsCarrier-MscPassport-AtmIispMIB