Nortel-MsCarrier-MscPassport-AtmIispMIB :: mscAtmIfIispCallingAScrDefaultInsertionAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmIispMIB › mscAtmIfIispCallingAScrDefaultInsertionAddress

mscAtmIfIispCallingAScrDefaultInsertionAddress

Module: Nortel-MsCarrier-MscPassport-AtmIispMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrDefaultInsertionAddress

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2

Node type: OBJECT-TYPE

Type: HexString

Access: read-write

Description: This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected.

What is mscAtmIfIispCallingAScrDefaultInsertionAddress?

The ATM address (up to 20 bytes, hex, default empty) automatically inserted into an outgoing SVC connection request when calling-address screening is enabled but the request itself carries no calling address. If screening is enabled and this attribute is left empty, calls without a calling address are simply rejected rather than defaulted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrDefaultInsertionAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrDefaultInsertionAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2.1 s <value>

Start monitoring Nortel MSC Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrDefaultInsertionAddress OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport ATM switch (IISP inter-switch signaling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.7mscAtmIfIispNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5mscAtmIfIispCallingAScrNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10mscAtmIfIispCallingAScrProvTableNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10.1mscAtmIfIispCallingAScrProvEntryNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.2mscAtmIfIispCallingAScrDefaultInsertionAddressNortel-MsCarrier-MscPassport-AtmIispMIB