Nortel-MsCarrier-MscPassport-AtmIispMIB :: mscAtmIfIispCallingAScrAdminStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmIispMIB › mscAtmIfIispCallingAScrAdminStatus

mscAtmIfIispCallingAScrAdminStatus

Module: Nortel-MsCarrier-MscPassport-AtmIispMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrAdminStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether the calling address screening feature is enabled or disabled.

If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected

If the value is disabled, no calling address screening is performed.

What is mscAtmIfIispCallingAScrAdminStatus?

Enables or disables calling-address screening for incoming SVC calls on this interface (default disabled). When enabled, an incoming call's calling address is checked against the provisioned address list and accepted/rejected per the matched entry's action; an incoming call whose address isn't provisioned at all is rejected outright.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1.1 i <value>

Start monitoring Nortel MSC Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmIispMIB::mscAtmIfIispCallingAScrAdminStatus OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport ATM switch (IISP inter-switch signaling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.7mscAtmIfIispNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5mscAtmIfIispCallingAScrNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10mscAtmIfIispCallingAScrProvTableNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10.1mscAtmIfIispCallingAScrProvEntryNortel-MsCarrier-MscPassport-AtmIispMIB
1.3.6.1.4.1.562.36.2.1.114.7.5.10.1.1mscAtmIfIispCallingAScrAdminStatusNortel-MsCarrier-MscPassport-AtmIispMIB