Nortel-Magellan-Passport-SnaMIB

All MIBs › Nortel-Magellan-Passport-SnaMIB

Category: Nortel Magellan Passport, SNA / Legacy Protocols

Description: Defines SNMP management objects for SNA protocol integration and DLSw gateway functions on Nortel Magellan Passport switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-SnaMIB?

Nortel-Magellan-Passport-SnaMIB is a Nortel Magellan/MsCarrier Passport proprietary MIB controlling the addition and deletion of SNA port (vrPpSnaPort, virtual-router SNA interface) components on the Passport wide-area switching platform's component-based management architecture, where every provisionable object is represented as a named, creatable/deletable "component". Its row-status table records each component's name, storage type, and index, alongside an admin-control table setting each SNA port's SNMP administrative status. As a configuration MIB it lets an administrator provision or remove SNA port (vrPpSnaPort, virtual-router SNA interface) components and confirm their operational status. It is deployed on Nortel Magellan/MsCarrier Passport wide-area switching platforms. Engineers can download the Nortel-Magellan-Passport-SnaMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-SnaMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan/MsCarrier Passport wide-area switching platforms

Monitoring Examples

An administrator creates a new SNA port (vrPpSnaPort, virtual-router SNA interface) component via this MIB's row-status table when provisioning that service on a Nortel Passport switch, then confirms its operational status came up correctly.

What Can Be Monitored

SNA port (vrPpSnaPort, virtual-router SNA interface) component provisioning and operational status

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

DashedHexString
HexString
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

passportMIBs

OBJECT-IDENTITY

From Nortel-Magellan-Passport-VirtualRouterMIB

vr	OBJECT-IDENTITY
vrIndex	OBJECT-TYPE
vrPp	OBJECT-IDENTITY
vrPpIndex	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
vrPpSnaPort	1.3.6.1.4.1.562.2.4.1.100.3.15
vrPpSnaPortRowStatusTable	1.3.6.1.4.1.562.2.4.1.100.3.15.1		not-accessible	This entry controls the addition and deletion of vrPpSnaPort components.
vrPpSnaPortRowStatusEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.1.1		not-accessible	A single entry in the table represents a single vrPpSnaPort component.
ROW vrPpSnaPortRowStatus	1.3.6.1.4.1.562.2.4.1.100.3.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of vrPpSnaPort components. These components can be added and deleted.
STR vrPpSnaPortComponentName	1.3.6.1.4.1.562.2.4.1.100.3.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO vrPpSnaPortStorageType	1.3.6.1.4.1.562.2.4.1.100.3.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the vrPpSnaPort tables.
NON vrPpSnaPortIndex	1.3.6.1.4.1.562.2.4.1.100.3.15.1.1.10	NonReplicated	not-accessible	This variable represents the index for the vrPpSnaPort tables.
vrPpSnaPortCircuit	1.3.6.1.4.1.562.2.4.1.100.3.15.2
vrPpSnaPortCircuitRowStatusTable	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of vrPpSnaPortCircuit components.
vrPpSnaPortCircuitRowStatusEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1		not-accessible	A single entry in the table represents a single vrPpSnaPortCircuit component.
ROW vrPpSnaPortCircuitRowStatus	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of vrPpSnaPortCircuit components. These components cannot be added nor deleted.
STR vrPpSnaPortCircuitComponentName	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO vrPpSnaPortCircuitStorageType	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the vrPpSnaPortCircuit tables.
STR vrPpSnaPortCircuitS1MacIndex	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.10	DashedHexString	not-accessible	This variable represents an index for the vrPpSnaPortCircuit tables.
I32 vrPpSnaPortCircuitS1SapIndex	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.11	Integer32	not-accessible	This variable represents an index for the vrPpSnaPortCircuit tables.
STR vrPpSnaPortCircuitS2MacIndex	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.12	DashedHexString	not-accessible	This variable represents an index for the vrPpSnaPortCircuit tables.
I32 vrPpSnaPortCircuitS2SapIndex	1.3.6.1.4.1.562.2.4.1.100.3.15.2.1.1.13	Integer32	not-accessible	This variable represents an index for the vrPpSnaPortCircuit tables.
vrPpSnaPortCircuitOperTable	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group defines an entry in the SnaCircuitEntry Table.
vrPpSnaPortCircuitOperEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1		not-accessible	An entry in the vrPpSnaPortCircuitOperTable.
INT vrPpSnaPortCircuitS1DlcType	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.2	INTEGER	read-only	This attribute indicates the DLC protocol in use between the SNA node and S1.
STR vrPpSnaPortCircuitS1RouteInfo	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.3	HexString	read-only	If source-route bridging is in use between the SNA node and S1, this is the routing information field describing the path between the two devices. The format of the routing information corresponds to that of the route designator fields of a specifically routed SRB frame. Otherwise the value will be a Hex string of zero length.
INT vrPpSnaPortCircuitS2Location	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.6	INTEGER	read-only	This attribute indicates the location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively.
INT vrPpSnaPortCircuitOrigin	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.10	INTEGER	read-only	This attribute indicates which of the two end stations initiated the establishment of this circuit.
INT vrPpSnaPortCircuitState	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.13	INTEGER	read-only	This attribute indicates the current state of this circuit. Note that this implementation does not keep entries after circuit disconnect. Details regarding the state machine and meaning of individual states may be found in RFC 1795.
INT vrPpSnaPortCircuitPriority	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.14	INTEGER	read-only	This attribute indicates the transmission priority of this circuit as understood by this SNA node. This value is determined by the two SNA nodes at circuit startup time.
NUM vrPpSnaPortCircuitVcId	1.3.6.1.4.1.562.2.4.1.100.3.15.2.100.1.26	RowPointer	read-only	This attribute indicates the component name of the GvcIf/n Dlci/n which represents this VC connection in the SNA DLR service. This attribute appears only for circuits that are connecting over a Frame Relay DLCI only. For circuits connecting over Qllc VCs or Token Ring interface this attribute does not appear.
vrPpSnaPortAdminControlTable	1.3.6.1.4.1.562.2.4.1.100.3.15.100		not-accessible	This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
vrPpSnaPortAdminControlEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.100.1		not-accessible	An entry in the vrPpSnaPortAdminControlTable.
INT vrPpSnaPortSnmpAdminStatus	1.3.6.1.4.1.562.2.4.1.100.3.15.100.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
vrPpSnaPortProvTable	1.3.6.1.4.1.562.2.4.1.100.3.15.101		not-accessible	This group contains provisionable attributes for SNA ports.
vrPpSnaPortProvEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.101.1		not-accessible	An entry in the vrPpSnaPortProvTable.
U32 vrPpSnaPortVirtualSegmentLFSize	1.3.6.1.4.1.562.2.4.1.100.3.15.101.1.1	Unsigned32	read-write	This attribute specifies the largest frame size (including DLC header and info field but not any MAC-level or framing octets) for end-to- end connections established through this Sna component. This value is used as the largest frame size for all circuits unless a smaller value is specified in XID signals or by local LAN constraints.
vrPpSnaPortStateTable	1.3.6.1.4.1.562.2.4.1.100.3.15.103		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
vrPpSnaPortStateEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.103.1		not-accessible	An entry in the vrPpSnaPortStateTable.
INT vrPpSnaPortAdminState	1.3.6.1.4.1.562.2.4.1.100.3.15.103.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT vrPpSnaPortOperationalState	1.3.6.1.4.1.562.2.4.1.100.3.15.103.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT vrPpSnaPortUsageState	1.3.6.1.4.1.562.2.4.1.100.3.15.103.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
vrPpSnaPortOperStatusTable	1.3.6.1.4.1.562.2.4.1.100.3.15.104		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
vrPpSnaPortOperStatusEntry	1.3.6.1.4.1.562.2.4.1.100.3.15.104.1		not-accessible	An entry in the vrPpSnaPortOperStatusTable.
INT vrPpSnaPortSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.100.3.15.104.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
vrSna	1.3.6.1.4.1.562.2.4.1.100.14
vrSnaRowStatusTable	1.3.6.1.4.1.562.2.4.1.100.14.1		not-accessible	This entry controls the addition and deletion of vrSna components.
vrSnaRowStatusEntry	1.3.6.1.4.1.562.2.4.1.100.14.1.1		not-accessible	A single entry in the table represents a single vrSna component.
ROW vrSnaRowStatus	1.3.6.1.4.1.562.2.4.1.100.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of vrSna components. These components can be added and deleted.
STR vrSnaComponentName	1.3.6.1.4.1.562.2.4.1.100.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO vrSnaStorageType	1.3.6.1.4.1.562.2.4.1.100.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the vrSna tables.
NON vrSnaIndex	1.3.6.1.4.1.562.2.4.1.100.14.1.1.10	NonReplicated	not-accessible	This variable represents the index for the vrSna tables.
vrSnaAdminControlTable	1.3.6.1.4.1.562.2.4.1.100.14.100		not-accessible	This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
vrSnaAdminControlEntry	1.3.6.1.4.1.562.2.4.1.100.14.100.1		not-accessible	An entry in the vrSnaAdminControlTable.
INT vrSnaSnmpAdminStatus	1.3.6.1.4.1.562.2.4.1.100.14.100.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
vrSnaStateTable	1.3.6.1.4.1.562.2.4.1.100.14.101		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
vrSnaStateEntry	1.3.6.1.4.1.562.2.4.1.100.14.101.1		not-accessible	An entry in the vrSnaStateTable.
INT vrSnaAdminState	1.3.6.1.4.1.562.2.4.1.100.14.101.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT vrSnaOperationalState	1.3.6.1.4.1.562.2.4.1.100.14.101.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT vrSnaUsageState	1.3.6.1.4.1.562.2.4.1.100.14.101.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
vrSnaOperStatusTable	1.3.6.1.4.1.562.2.4.1.100.14.102		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
vrSnaOperStatusEntry	1.3.6.1.4.1.562.2.4.1.100.14.102.1		not-accessible	An entry in the vrSnaOperStatusTable.
INT vrSnaSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.100.14.102.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
vrSnaOperTable	1.3.6.1.4.1.562.2.4.1.100.14.103		not-accessible	This group contains operational attributes which describe the behavior of the Sna component and associated ports under the Virtual Router (VR).
vrSnaOperEntry	1.3.6.1.4.1.562.2.4.1.100.14.103.1		not-accessible	An entry in the vrSnaOperTable.
STR vrSnaVersion	1.3.6.1.4.1.562.2.4.1.100.14.103.1.2	HexString	read-only	This attribute indicates the particular version of the SNA standard supported by this Sna. The first 2 digits represent the SNA standard Version number of this Sna, the second 2 digits represent the SNA standard Release number.
vrSnaCircStatsTable	1.3.6.1.4.1.562.2.4.1.100.14.104		not-accessible	A circuit is the end-to-end association of two Data Link Routing (DLR) entities through one or two DLR nodes. It is the concatenation of two 'data links', optionally with an intervening transport connection (not initially supported). The origin of the circuit is the end station that initiates the circuit. The target of the circuit is the end station that receives the initiation.
vrSnaCircStatsEntry	1.3.6.1.4.1.562.2.4.1.100.14.104.1		not-accessible	An entry in the vrSnaCircStatsTable.
G32 vrSnaActives	1.3.6.1.4.1.562.2.4.1.100.14.104.1.1	Gauge32	read-only	This attribute indiates the current number of circuits in Circuit table that are not in the disconnected state.
C32 vrSnaCreates	1.3.6.1.4.1.562.2.4.1.100.14.104.1.2	Counter32	read-only	This attribute indicates the total number of entries ever added to Circuit table, or reactivated upon exiting disconnected state.
vrSnaDirStatsTable	1.3.6.1.4.1.562.2.4.1.100.14.105		not-accessible	MAC Table Directory statistics
vrSnaDirStatsEntry	1.3.6.1.4.1.562.2.4.1.100.14.105.1		not-accessible	An entry in the vrSnaDirStatsTable.
G32 vrSnaMacEntries	1.3.6.1.4.1.562.2.4.1.100.14.105.1.1	Gauge32	read-only	This attribute indicates the current total number of entries in the DirectoryEntry table.
C32 vrSnaMacCacheHits	1.3.6.1.4.1.562.2.4.1.100.14.105.1.2	Counter32	read-only	This attribute indicates the number of times a cache search for a particular MAC address resulted in success.
C32 vrSnaMacCacheMisses	1.3.6.1.4.1.562.2.4.1.100.14.105.1.3	Counter32	read-only	This attribute indicates the number of times a cache search for a particular MAC address resulted in failure.
snaMIB	1.3.6.1.4.1.562.2.4.2.56
snaGroup	1.3.6.1.4.1.562.2.4.2.56.1
snaGroupBE	1.3.6.1.4.1.562.2.4.2.56.1.5
snaGroupBE01	1.3.6.1.4.1.562.2.4.2.56.1.5.2
snaGroupBE01A	1.3.6.1.4.1.562.2.4.2.56.1.5.2.2
snaCapabilities	1.3.6.1.4.1.562.2.4.2.56.3
snaCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.56.3.5
snaCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.56.3.5.2
snaCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.56.3.5.2.2

RFC description

Nortel Magellan Passport SNA Enterprise MIB for managing SNA (Systems Network Architecture) ports and components.

Start monitoring Nortel Magellan/MsCarrier Passport wide-area switching platform (SNA port component) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-SnaMIB

What Is Nortel-Magellan-Passport-SnaMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description