All MIBs › NOVELSAT-DEMODULATOR-MIB
Organization: Novelsat
Last Updated: 2010-09-12
Category: Satellite and VSAT
Description: Manages demodulator channel parameters, signal quality metrics, and lock status for Novelsat VSAT satellite modems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NOVELSAT-DEMODULATOR-MIB?
NOVELSAT-DEMODULATOR-MIB is a vendor-specific MIB for Novelsat's satellite demodulator product line, part of VSAT/satellite communications equipment used in DVB-S2/S2X links. It exposes configuration and signal-related objects for each demodulator line, covering RF tuning parameters (frequency, symbol rate, roll-off), modulation/coding behavior (ACM mode, ACM margin, gold sequence), and channel control features like LNB power control and dual-channel state. In monitoring terms this MIB is primarily used to track the operational configuration and signal-quality health of each demodulator channel, letting an operator confirm that a given line's RF and demodulation settings match the expected link plan and that adaptive coding/modulation is behaving correctly under changing signal conditions. There is no explicit dependency on other MIBs evident from the module description, and it is a purely proprietary Novelsat instrumentation module. It is deployed in VSAT hub and remote terminal equipment, where NOVELSAT-DEMODULATOR-MIB SNMP monitoring supports satellite backhaul, broadcast, or broadband access.
IPNetwork Monitor allows you to monitor SNMP objects defined in NOVELSAT-DEMODULATOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Novelsat satellite demodulator/VSAT modem
Monitoring Examples
An operator would poll nsDemodConfigLineRFFreq and nsDemodConfigLineSymbolRate per line to verify a demodulator is tuned to the correct transponder frequency and symbol rate for its assigned carrier. Checking nsDemodConfigLineAcmMode together with nsDemodConfigLineAcmMargin reveals whether adaptive coding and modulation is enabled and how much margin remains before the link would need to step down to a more robust modulation, an early warning of rain fade or interference. nsDemodConfigLineLNBControl and nsDemodConfigLineDualChState indicate whether the associated LNB is powered and which channel is active, useful for diagnosing a dead receive chain.
What Can Be Monitored
- RF tuning frequency
- symbol rate
- roll-off factor
- LNB control state
- ACM mode and margin
- dual-channel state
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From NOVELSAT-ROOT-MIB
| nsRoot | MODULE-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nsDemodConfig | 1.3.6.1.4.1.37576.4.1 | Demodulator MIB branch that holds all Demodulator configuration parameters. | ||
| nsDemodConfigChannel | 1.3.6.1.4.1.37576.4.1.2 | Demodulator MIB branch that holds all Demodulator channel parameters. | ||
| nsDemodConfigChannelEntry | 1.3.6.1.4.1.37576.4.1.2.1.1 | not-accessible | Conceptual row in table for each channel. | |
| nsDemodConfigChannelTable | 1.3.6.1.4.1.37576.4.1.2.1 | not-accessible | A list of Channel parameters | |
| I32 nsDemodConfigChIsiFrom | 1.3.6.1.4.1.37576.4.1.2.1.1.1 | Integer32 | read-write | This parameter holds channel ISI start range. |
| I32 nsDemodConfigChIsiTo | 1.3.6.1.4.1.37576.4.1.2.1.1.2 | Integer32 | read-write | This parameter holds channel ISI end range. |
| nsDemodConfigDiseqc | 1.3.6.1.4.1.37576.4.1.4 | Demodulator MIB branch that holds all Demodulator DiSEqC parameters. | ||
| nsDemodConfigDiseqcEntry | 1.3.6.1.4.1.37576.4.1.4.1.1 | not-accessible | Conceptual row in table for each DiSEqC. | |
| nsDemodConfigDiseqcExecuteCmd | 1.3.6.1.4.1.37576.4.1.4.2 | Demodulator MIB branch that holds parameters to execute DiSEqC command. | ||
| U32 nsDemodConfigDiseqcExecuteCmdData | 1.3.6.1.4.1.37576.4.1.4.2.2 | Unsigned32 | read-write | This parameter holds DiSEqC command's data for execution. |
| INT nsDemodConfigDiseqcExecuteCmdExecute | 1.3.6.1.4.1.37576.4.1.4.2.3 | INTEGER | read-write | This parameter holds allow to start DiSEqC command execution. |
| STR nsDemodConfigDiseqcExecuteCmdName | 1.3.6.1.4.1.37576.4.1.4.2.1 | DisplayString | read-write | This parameter holds DiSEqC command's name to execute. |
| C64 nsDemodConfigDiseqcHeaderBytes | 1.3.6.1.4.1.37576.4.1.4.1.1.2 | Counter64 | read-create | This parameter holds DiSEqC command's header bytes. |
| STR nsDemodConfigDiseqcName | 1.3.6.1.4.1.37576.4.1.4.1.1.1 | DisplayString | not-accessible | This parameter holds DiSEqC command's name. |
| ROW nsDemodConfigDiseqcNotifyRowStatus | 1.3.6.1.4.1.37576.4.1.4.1.1.5 | RowStatus | read-create | Used to create new rows or delete in the table. Note that all rows are active(1) at all times, since default values are given to empty parameters. Value createAndGo(4) is used when all row parameters are inserted at once, while createAndWait(5) is used to create row with default values. Value destroy(6) is used to remove a row |
| U32 nsDemodConfigDiseqcNumDataBytes | 1.3.6.1.4.1.37576.4.1.4.1.1.3 | Unsigned32 | read-create | This parameter holds DiSEqC command's number of data bytes. |
| nsDemodConfigDiseqcTable | 1.3.6.1.4.1.37576.4.1.4.1 | not-accessible | A list of Diseqc parameters | |
| INT nsDemodConfigDiseqcToneBurstMode | 1.3.6.1.4.1.37576.4.1.4.1.1.4 | INTEGER | read-create | This parameter holds DiSEqC command's tone burst mode. |
| nsDemodConfigInterface | 1.3.6.1.4.1.37576.4.1.3 | Demodulator MIB branch that holds all Demodulator Interface parameters. | ||
| INT nsDemodConfigInterfaceASIDataInvert | 1.3.6.1.4.1.37576.4.1.3.2.1.2 | INTEGER | read-write | This parameter holds ASI interface data invert. |
| I32 nsDemodConfigInterfaceASIDataRate | 1.3.6.1.4.1.37576.4.1.3.2.1.4 | Integer32 | read-write | This parameter holds ASI interface data rate in bPS. |
| I32 nsDemodConfigInterfaceASIDataRateAccuracy | 1.3.6.1.4.1.37576.4.1.3.2.1.5 | Integer32 | read-write | This parameter holds ASI interface data rate accuracy in hundreds of ppm. |
| INT nsDemodConfigInterfaceASIDataRateMode | 1.3.6.1.4.1.37576.4.1.3.2.1.3 | INTEGER | read-write | This parameter holds ASI interface data rate mode: automatic/manual. |
| nsDemodConfigInterfaceASIEntry | 1.3.6.1.4.1.37576.4.1.3.2.1 | not-accessible | Conceptual row in table for each ASI interface. | |
| INT nsDemodConfigInterfaceASISource | 1.3.6.1.4.1.37576.4.1.3.2.1.1 | INTEGER | read-write | This parameter holds ASI interface source. |
| nsDemodConfigInterfaceASITable | 1.3.6.1.4.1.37576.4.1.3.2 | not-accessible | A list of ASI interfaces | |
| INT nsDemodConfigInterfaceEthernetAutoNegotiation | 1.3.6.1.4.1.37576.4.1.3.4.1.2 | INTEGER | read-write | This parameter holds Ethernet interface auto-negotiation status |
| INT nsDemodConfigInterfaceEthernetDuplex | 1.3.6.1.4.1.37576.4.1.3.4.1.4 | INTEGER | read-write | This parameter holds Ethernet interface Duplex |
| INT nsDemodConfigInterfaceEthernetEncapsulation | 1.3.6.1.4.1.37576.4.1.3.4.1.5 | INTEGER | read-write | This parameter holds Ethernet interface Encapsulation |
| nsDemodConfigInterfaceEthernetEntry | 1.3.6.1.4.1.37576.4.1.3.4.1 | not-accessible | Conceptual row in table for each Ethernet interface. | |
| I32 nsDemodConfigInterfaceEthernetPid | 1.3.6.1.4.1.37576.4.1.3.4.1.6 | Integer32 | read-write | This parameter holds Ethernet interface PID value |
| INT nsDemodConfigInterfaceEthernetSource | 1.3.6.1.4.1.37576.4.1.3.4.1.1 | INTEGER | read-write | This parameter holds Ethernet interface source |
| INT nsDemodConfigInterfaceEthernetSpeed | 1.3.6.1.4.1.37576.4.1.3.4.1.3 | INTEGER | read-write | This parameter holds Ethernet interface speed |
| nsDemodConfigInterfaceEthernetTable | 1.3.6.1.4.1.37576.4.1.3.4 | not-accessible | A list of Ethernet interfaces | |
| INT nsDemodConfigInterfaceGigEAutoNegotiation | 1.3.6.1.4.1.37576.4.1.3.5.1.1 | INTEGER | read-write | This parameter holds GigE interface auto-negotiation status |
| INT nsDemodConfigInterfaceGigEDuplex | 1.3.6.1.4.1.37576.4.1.3.5.1.3 | INTEGER | read-write | This parameter holds GigE interface Duplex |
| nsDemodConfigInterfaceGigEEntry | 1.3.6.1.4.1.37576.4.1.3.5.1 | not-accessible | Conceptual row in table for each gigE interface. | |
| INT nsDemodConfigInterfaceGigEPortType | 1.3.6.1.4.1.37576.4.1.3.5.1.5 | INTEGER | read-write | This parameter holds GigE interface port type value |
| INT nsDemodConfigInterfaceGigESpeed | 1.3.6.1.4.1.37576.4.1.3.5.1.2 | INTEGER | read-write | This parameter holds GigE interface speed |
| nsDemodConfigInterfaceGigETable | 1.3.6.1.4.1.37576.4.1.3.5 | not-accessible | A list of GigE interfaces | |
| nsDemodConfigInterfaceTestEntry | 1.3.6.1.4.1.37576.4.1.3.1.1 | not-accessible | Conceptual row in table for each test interface. | |
| I32 nsDemodConfigInterfaceTestIgnoreBytes | 1.3.6.1.4.1.37576.4.1.3.1.1.4 | Integer32 | read-write | This parameter holds Test interface ignore bytes. |
| INT nsDemodConfigInterfaceTestInvert | 1.3.6.1.4.1.37576.4.1.3.1.1.3 | INTEGER | read-write | This parameter holds Test interface invert. |
| INT nsDemodConfigInterfaceTestPattern | 1.3.6.1.4.1.37576.4.1.3.1.1.2 | INTEGER | read-write | This parameter holds Test interface pattern. pattern2Pwr07Neg1 = 2^07-1 pattern2Pwr09Neg1 = 2^09-1 pattern2Pwr11Neg1 = 2^11-1 pattern2Pwr15Neg1 = 2^15-1 pattern2Pwr20Neg1 = 2^20-1 pattern2Pwr23Neg1 = 2^23-1 pattern2Pwr29Neg1 = 2^29-1 pattern2Pwr31Neg1 = 2^31-1 patternAllZeros = all zeros patternAllOnes = all ones patternBitAlternate = bit alternate pattern2BitAlternate= 2 bit alternate pattern7Ones = 1111111 (7 ones) pattern7Zeros = 0000000 (7 zeros) pattern6Ones = 111111 (6 ones) pattern6Zeros = 000000 (6 zeros) pattern55AA = 0x55AA pattern6699 = 0x6699 patternC33C = 0xC33C pattern00FF = 0x00FF patternSAWTOOTH = SAWTOOTH |
| INT nsDemodConfigInterfaceTestSource | 1.3.6.1.4.1.37576.4.1.3.1.1.1 | INTEGER | read-write | This parameter holds Test interface source. |
| nsDemodConfigInterfaceTestTable | 1.3.6.1.4.1.37576.4.1.3.1 | not-accessible | A list of Test interfaces | |
| nsDemodConfigLine | 1.3.6.1.4.1.37576.4.1.1 | Demodulator MIB branch that holds all Demodulator line parameters. | ||
| IP nsDemodConfigLineAcmIpAddress | 1.3.6.1.4.1.37576.4.1.1.16 | IpAddress | read-write | This parameter is no longer supported |
| IP nsDemodConfigLineAcmIpNetmask | 1.3.6.1.4.1.37576.4.1.1.17 | IpAddress | read-write | This parameter is no longer supported |
| IP nsDemodConfigLineAcmIpNextHopIp | 1.3.6.1.4.1.37576.4.1.1.18 | IpAddress | read-write | This parameter is no longer supported |
| I32 nsDemodConfigLineAcmMargin | 1.3.6.1.4.1.37576.4.1.1.10 | Integer32 | read-write | This parameter is no longer supported |
| I32 nsDemodConfigLineAcmMarginCh1 | 1.3.6.1.4.1.37576.4.1.1.19 | Integer32 | read-write | This parameter holds Line ACM margin for channel 2 in hundreds of dB. |
| I32 nsDemodConfigLineAcmMarginCh2 | 1.3.6.1.4.1.37576.4.1.1.20 | Integer32 | read-write | This parameter holds Line ACM margin for channel 2 in hundreds of dB. |
| INT nsDemodConfigLineAcmMode | 1.3.6.1.4.1.37576.4.1.1.8 | INTEGER | read-write | This parameter holds Line ACM mode: enable/disable. |
| IP nsDemodConfigLineAcmServerAddress | 1.3.6.1.4.1.37576.4.1.1.9 | IpAddress | read-write | This parameter holds Line ACM server address. |
| INT nsDemodConfigLineAcmUseManagementIp | 1.3.6.1.4.1.37576.4.1.1.15 | INTEGER | read-write | This parameter is no longer supported |
| INT nsDemodConfigLineAdvancedAcmMode | 1.3.6.1.4.1.37576.4.1.1.25 | INTEGER | read-write | This parameter holds Line Advanced ACM: enable/disable. |
| INT nsDemodConfigLineAutoCcmMode | 1.3.6.1.4.1.37576.4.1.1.12 | INTEGER | read-write | This parameter holds Line Auto CCM mode: enable/disable. |
| INT nsDemodConfigLineDualChState | 1.3.6.1.4.1.37576.4.1.1.6 | INTEGER | read-write | This parameter holds Line dual channel status: dual/single channel. |
| U32 nsDemodConfigLineEchoCancellationMaxDelay | 1.3.6.1.4.1.37576.4.1.1.23 | Unsigned32 | read-write | This parameter holds Line echo cancellation max delay in mSec. |
| U32 nsDemodConfigLineEchoCancellationMinDelay | 1.3.6.1.4.1.37576.4.1.1.22 | Unsigned32 | read-write | This parameter holds Line echo cancellation min delay in mSec. |
| INT nsDemodConfigLineEchoCancellationMode | 1.3.6.1.4.1.37576.4.1.1.21 | INTEGER | read-write | This parameter holds Line echo cancellation mode. |
| I32 nsDemodConfigLineEchoCancellationTxFreqOffset | 1.3.6.1.4.1.37576.4.1.1.24 | Integer32 | read-write | This parameter holds Line echo cancellation TX frequency offset in Hz. |
| I32 nsDemodConfigLineGoldSeq | 1.3.6.1.4.1.37576.4.1.1.11 | Integer32 | read-write | This parameter holds Line golden sequence. |
| INT nsDemodConfigLineInputLevelMode | 1.3.6.1.4.1.37576.4.1.1.14 | INTEGER | read-write | This parameter holds Line input level mode: constant power/constant envelope. |
| INT nsDemodConfigLineLNBControl | 1.3.6.1.4.1.37576.4.1.1.5 | INTEGER | read-write | This parameter holds Line LNB control. |
| U32 nsDemodConfigLineLOFreq | 1.3.6.1.4.1.37576.4.1.1.13 | Unsigned32 | read-write | This parameter holds Line LO frequency in 10Hrz. |
| INT nsDemodConfigLineMode | 1.3.6.1.4.1.37576.4.1.1.1 | INTEGER | read-write | This parameter holds Line mode. |
| INT nsDemodConfigLineNoneLinearMode | 1.3.6.1.4.1.37576.4.1.1.7 | INTEGER | read-write | This parameter holds Line none linear mode: off/on. |
| U32 nsDemodConfigLineRFFreq | 1.3.6.1.4.1.37576.4.1.1.2 | Unsigned32 | read-write | This parameter holds Line RF frequency in 10Hrz. |
| INT nsDemodConfigLineRollOff | 1.3.6.1.4.1.37576.4.1.1.3 | INTEGER | read-write | This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 |
| I32 nsDemodConfigLineSymbolRate | 1.3.6.1.4.1.37576.4.1.1.4 | Integer32 | read-write | This parameter holds Line symbol rate in SPS. |
| nsDemodMonitor | 1.3.6.1.4.1.37576.4.2 | Demodulator MIB branch that holds all Demodulator status and alarms. | ||
| nsDemodMonitorChannelEntry | 1.3.6.1.4.1.37576.4.2.1.21.1 | not-accessible | Conceptual row in table for each channel option. | |
| nsDemodMonitorEthernet | 1.3.6.1.4.1.37576.4.2.4 | Common MIB branch that holds all Ethernet statistics. | ||
| nsDemodMonitorEthernetEntry | 1.3.6.1.4.1.37576.4.2.4.1.1 | not-accessible | Conceptual row in table for each event. | |
| STR nsDemodMonitorEthernetStatisticsName | 1.3.6.1.4.1.37576.4.2.4.1.1.2 | DisplayString | read-only | Name of Ethernet Statistics |
| C32 nsDemodMonitorEthernetStatisticsNumber | 1.3.6.1.4.1.37576.4.2.4.1.1.1 | Counter32 | not-accessible | Ethernet Statistics Number |
| I32 nsDemodMonitorEthernetStatisticsValueA | 1.3.6.1.4.1.37576.4.2.4.1.1.3 | Integer32 | read-only | Value of Ethernet Statistics |
| I32 nsDemodMonitorEthernetStatisticsValueB | 1.3.6.1.4.1.37576.4.2.4.1.1.4 | Integer32 | read-only | Value of Ethernet Statistics |
| nsDemodMonitorEthernetTable | 1.3.6.1.4.1.37576.4.2.4.1 | not-accessible | List of Ethernet Statistics | |
| nsDemodMonitorInterface | 1.3.6.1.4.1.37576.4.2.2 | Demodulator MIB branch that holds all Demodulator interface statuses. | ||
| nsDemodMonitorInterfaceEntry | 1.3.6.1.4.1.37576.4.2.2.1.1 | not-accessible | Conceptual row in table for each interface. | |
| STR nsDemodMonitorInterfaceName | 1.3.6.1.4.1.37576.4.2.2.1.1.1 | DisplayString | read-only | Name of interface |
| STR nsDemodMonitorInterfaceRate | 1.3.6.1.4.1.37576.4.2.2.1.1.3 | DisplayString | read-only | This parameter holds interface source rate. |
| STR nsDemodMonitorInterfaceSource | 1.3.6.1.4.1.37576.4.2.2.1.1.2 | DisplayString | read-only | Source of interface |
| nsDemodMonitorInterfaceTable | 1.3.6.1.4.1.37576.4.2.2.1 | not-accessible | A list of interface statuses | |
| nsDemodMonitorLine | 1.3.6.1.4.1.37576.4.2.1 | Demodulator MIB branch that holds all Demodulator line statuses. | ||
| I32 nsDemodMonitorLineChannelDataRate | 1.3.6.1.4.1.37576.4.2.1.21.1.1 | Integer32 | read-only | This parameter holds Channel Data rate status in bit/sec. |
| INT nsDemodMonitorLineChannelFEC | 1.3.6.1.4.1.37576.4.2.1.21.1.6 | INTEGER | read-only | This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec7Div9 = 7/9 fec4Div5 = 4/5 fec37Div45 = 37/45 fec5Div6 = 5/6 fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 |
| I32 nsDemodMonitorLineChannelFrames | 1.3.6.1.4.1.37576.4.2.1.21.1.9 | Integer32 | read-only | This parameter holds mode code pilot. |
| I32 nsDemodMonitorLineChannelFramesErr | 1.3.6.1.4.1.37576.4.2.1.21.1.10 | Integer32 | read-only | This parameter holds mode code pilot. |
| STR nsDemodMonitorLineChannelFramesErrRate | 1.3.6.1.4.1.37576.4.2.1.21.1.11 | DisplayString | read-only | This parameter holds mode code FER. |
| INT nsDemodMonitorLineChannelFrameSize | 1.3.6.1.4.1.37576.4.2.1.21.1.8 | INTEGER | read-only | This parameter holds mode code pilot. |
| I32 nsDemodMonitorLineChannelLinkMargin | 1.3.6.1.4.1.37576.4.2.1.21.1.2 | Integer32 | read-only | This parameter holds Line Link Margin in hundreds of dB. |
| INT nsDemodMonitorLineChannelLockStatus | 1.3.6.1.4.1.37576.4.2.1.21.1.3 | INTEGER | read-only | This parameter holds Channel lock status. |
| INT nsDemodMonitorLineChannelModulation | 1.3.6.1.4.1.37576.4.2.1.21.1.5 | INTEGER | read-only | This parameter holds mode code modulation. |
| INT nsDemodMonitorLineChannelPilot | 1.3.6.1.4.1.37576.4.2.1.21.1.7 | INTEGER | read-only | This parameter holds mode code pilot. |
| I32 nsDemodMonitorLineChannelSNR | 1.3.6.1.4.1.37576.4.2.1.21.1.4 | Integer32 | read-only | This parameter holds Line Data SNR status in hundreds of dB. |
| nsDemodMonitorLineChannelTable | 1.3.6.1.4.1.37576.4.2.1.21 | not-accessible | A list of Channel specific status fields | |
| INT nsDemodMonitorLineCntrClrCmd | 1.3.6.1.4.1.37576.4.2.1.23 | INTEGER | read-write | Clear Line counters command |
| I32 nsDemodMonitorLineCompositePower | 1.3.6.1.4.1.37576.4.2.1.4 | Integer32 | read-only | This parameter holds Line Composite power status in hundreds of dBm. |
| I32 nsDemodMonitorLineDataRateCh1 | 1.3.6.1.4.1.37576.4.2.1.8 | Integer32 | read-only | This parameter holds Line Data rate channel 1 status in bit/sec. |
| I32 nsDemodMonitorLineDataRateCh2 | 1.3.6.1.4.1.37576.4.2.1.9 | Integer32 | read-only | This parameter holds Line Data rate channel 2 status in bit/sec. |
| I32 nsDemodMonitorLineEcGainDiff | 1.3.6.1.4.1.37576.4.2.1.27 | Integer32 | read-only | This parameter holds Echo Cancellation Gain Difference in hundreds of dBm. |
| U32 nsDemodMonitorLineEcSatDelay | 1.3.6.1.4.1.37576.4.2.1.25 | Unsigned32 | read-only | This parameter holds Echo Cancellation satellite delay in ms. |
| INT nsDemodMonitorLineEcState | 1.3.6.1.4.1.37576.4.2.1.24 | INTEGER | read-only | This parameter holds Echo Cancellation State. |
| I32 nsDemodMonitorLineEcTxFreqOffset | 1.3.6.1.4.1.37576.4.2.1.26 | Integer32 | read-only | This parameter holds Echo Cancellation TX frequency offset in Hz. |
| I32 nsDemodMonitorLineFERErrorFrames | 1.3.6.1.4.1.37576.4.2.1.14 | Integer32 | read-only | This parameter holds FER error frames. |
| STR nsDemodMonitorLineFERErrorFramesRate | 1.3.6.1.4.1.37576.4.2.1.15 | DisplayString | read-only | This parameter holds FER error frames rate. |
| I32 nsDemodMonitorLineFERFrames | 1.3.6.1.4.1.37576.4.2.1.13 | Integer32 | read-only | This parameter holds FER frames. |
| I32 nsDemodMonitorLineFrequencyOffset | 1.3.6.1.4.1.37576.4.2.1.19 | Integer32 | read-only | This parameter holds Line frequency offset status in Hz. |
| I32 nsDemodMonitorLineLinkMargin | 1.3.6.1.4.1.37576.4.2.1.17 | Integer32 | read-only | This parameter holds Line Link Margin in hundreds of dB. |
| INT nsDemodMonitorLineMode | 1.3.6.1.4.1.37576.4.2.1.1 | INTEGER | read-only | This parameter holds Line mode status. |
| I32 nsDemodMonitorLinePrbsDataBytes | 1.3.6.1.4.1.37576.4.2.1.10 | Integer32 | read-only | This parameter holds PRBS Data Rate. |
| I32 nsDemodMonitorLinePrbsErrorBits | 1.3.6.1.4.1.37576.4.2.1.11 | Integer32 | read-only | This parameter holds PRBS Error bits. |
| STR nsDemodMonitorLinePrbsErrorBitsRate | 1.3.6.1.4.1.37576.4.2.1.12 | DisplayString | read-only | This parameter holds PRBS Error bits rate. |
| INT nsDemodMonitorLinePrbsSource | 1.3.6.1.4.1.37576.4.2.1.20 | INTEGER | read-only | This parameter holds PRBS source. |
| U32 nsDemodMonitorLineRFFreq | 1.3.6.1.4.1.37576.4.2.1.7 | Unsigned32 | read-only | This parameter holds Line RF frequency status in 10Hz. |
| INT nsDemodMonitorLineRollOff | 1.3.6.1.4.1.37576.4.2.1.6 | INTEGER | read-only | This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 |
| I32 nsDemodMonitorLineSignalPower | 1.3.6.1.4.1.37576.4.2.1.22 | Integer32 | read-only | This parameter holds Line Signal Power status in hundreds of dBm. |
| I32 nsDemodMonitorLineSNR | 1.3.6.1.4.1.37576.4.2.1.3 | Integer32 | read-only | This parameter holds Line Pilot SNR status in hundreds of dB. |
| INT nsDemodMonitorLineState | 1.3.6.1.4.1.37576.4.2.1.2 | INTEGER | read-only | This parameter holds Line state status. |
| I32 nsDemodMonitorLineSymbolRate | 1.3.6.1.4.1.37576.4.2.1.5 | Integer32 | read-only | This parameter holds Symbol rate status in SPS. |
| I32 nsDemodMonitorLineSymbolRateOffset | 1.3.6.1.4.1.37576.4.2.1.18 | Integer32 | read-only | This parameter holds Line Symbol-rate offset status in thousands of PPM. |
| nsDemodMonitorModeCodeEntry | 1.3.6.1.4.1.37576.4.2.1.16.1 | not-accessible | Conceptual row in table for each mode code option. | |
| INT nsDemodMonitorModeCodeFEC | 1.3.6.1.4.1.37576.4.2.1.16.1.2 | INTEGER | not-accessible | This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div4Short = 1/4 DVBS2 SHORT FRAME fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec1Div2Short = 1/2 DVBS2 SHORT FRAME fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec3Div4Short = 3/4 DVBS2 SHORT FRAME fec7Div9 = 7/9 fec4Div5 = 4/5 fec4Div5Short = 4/5 DVBS2 SHORT FRAME fec37Div45 = 37/45 fec5Div6 = 5/6 fec5Div6Short = 5/6 DVBS2 SHORT FRAME fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 |
| I32 nsDemodMonitorModeCodeFrames | 1.3.6.1.4.1.37576.4.2.1.16.1.5 | Integer32 | read-only | This parameter holds mode code pilot. |
| STR nsDemodMonitorModeCodeFramesDesignatedToUnit | 1.3.6.1.4.1.37576.4.2.1.16.1.10 | DisplayString | read-only | This parameter holds the information whether the mode code was sent to this remote or not |
| I32 nsDemodMonitorModeCodeFramesErr | 1.3.6.1.4.1.37576.4.2.1.16.1.6 | Integer32 | read-only | This parameter holds mode code pilot. |
| STR nsDemodMonitorModeCodeFramesErrRate | 1.3.6.1.4.1.37576.4.2.1.16.1.7 | DisplayString | read-only | This parameter holds mode code FER. |
| INT nsDemodMonitorModeCodeFrameSize | 1.3.6.1.4.1.37576.4.2.1.16.1.4 | INTEGER | not-accessible | This parameter holds mode code pilot. |
| STR nsDemodMonitorModeCodeFramesLinkMargin | 1.3.6.1.4.1.37576.4.2.1.16.1.8 | DisplayString | read-only | This parameter holds mode code Link Margin. |
| STR nsDemodMonitorModeCodeFramesSnr | 1.3.6.1.4.1.37576.4.2.1.16.1.9 | DisplayString | read-only | This parameter holds mode code Snr. |
| INT nsDemodMonitorModeCodeModulation | 1.3.6.1.4.1.37576.4.2.1.16.1.1 | INTEGER | not-accessible | This parameter holds mode code modulation. |
| INT nsDemodMonitorModeCodePilot | 1.3.6.1.4.1.37576.4.2.1.16.1.3 | INTEGER | not-accessible | This parameter holds mode code pilot. |
| nsDemodMonitorModeCodeTable | 1.3.6.1.4.1.37576.4.2.1.16 | not-accessible | A list of Mode code status fields | |
| nsDemodMonitorSystem | 1.3.6.1.4.1.37576.4.2.3 | Demodulator MIB branch that holds all Demodulator system statuses. | ||
| INT nsDemodMonitorSystem10MHrzClkSource | 1.3.6.1.4.1.37576.4.2.3.3 | INTEGER | read-only | This parameter holds system 10MHrz clock source. |
| I32 nsDemodMonitorSystemBoardTmp | 1.3.6.1.4.1.37576.4.2.3.2 | Integer32 | read-only | This parameter holds system board temperature status in hundreds of Celsius degrees. |
| I32 nsDemodMonitorSystemFPGATmp | 1.3.6.1.4.1.37576.4.2.3.1 | Integer32 | read-only | This parameter holds system FPGA temperature status in hundreds of Celsius degrees. |
| INT nsDemodMonitorSystemLnbRefClk | 1.3.6.1.4.1.37576.4.2.3.5 | INTEGER | read-only | This parameter holds system LNB ref clock. |
| INT nsDemodMonitorSystemRefClkOut | 1.3.6.1.4.1.37576.4.2.3.4 | INTEGER | read-only | This parameter holds system ref clock out. |
| nsDemodulator | 1.3.6.1.4.1.37576.4 | Novelsat MIB branch for DeModulator products |
RFC description
NovelSat vendor-specific MIB for satellite demodulator management; defines objects for demodulator status, signal quality, and performance monitoring.
Start monitoring Novelsat satellite demodulator/VSAT modem with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.