---------------------------------------------- -- NOVELSAT-DEMODULATOR.mib -- -- MIB generated by naamab, Novelsat -- -- Sunday, September 12, 2010 at 15:46:00 -- ---------------------------------------------- NOVELSAT-DEMODULATOR-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Integer32, Counter32, OBJECT-IDENTITY, MODULE-IDENTITY, Unsigned32, IpAddress, Counter64 FROM SNMPv2-SMI DisplayString, DateAndTime, RowStatus FROM SNMPv2-TC ifIndex FROM IF-MIB nsRoot FROM NOVELSAT-ROOT-MIB; -- =================================================== nsDemodulator MODULE-IDENTITY LAST-UPDATED "201009121500Z" ORGANIZATION "Novelsat" CONTACT-INFO "21 Ha'taasiya St., Ra'anana 43654,Israel -------------------------- Tel: +972-9-7889730 Fax: +972-9- e-mail: info@novelsat.com, support@novelsat.com http://www.novelsat.com -------------------------- " DESCRIPTION "Novelsat MIB branch for DeModulator products" REVISION "201009121500Z" DESCRIPTION "Version 1.0.0.X" ::= { nsRoot 4 } -- =================================================== nsDemodConfig OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator configuration parameters." ::= { nsDemodulator 1 } -- =================================================== nsDemodConfigLine OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator line parameters." ::= { nsDemodConfig 1 } nsDemodConfigLineMode OBJECT-TYPE SYNTAX INTEGER { dvbs (0), dsng (1), dvbs2 (2), ns3 (3), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line mode." ::= { nsDemodConfigLine 1 } nsDemodConfigLineRFFreq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line RF frequency in 10Hrz." ::= { nsDemodConfigLine 2 } nsDemodConfigLineRollOff OBJECT-TYPE SYNTAX INTEGER { rollOff005 (0), rollOff010 (1), rollOff015 (2), rollOff020 (3), rollOff025 (4), rollOff035 (5), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 " ::= { nsDemodConfigLine 3 } nsDemodConfigLineSymbolRate OBJECT-TYPE SYNTAX Integer32 (50000..72000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line symbol rate in SPS." ::= { nsDemodConfigLine 4 } nsDemodConfigLineLNBControl OBJECT-TYPE SYNTAX INTEGER { lnbOff (0), lnb13v0khz (1), lnb13v22khz (2), lnb18v0khz (3), lnb18v22khz (4), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line LNB control." ::= { nsDemodConfigLine 5 } nsDemodConfigLineDualChState OBJECT-TYPE SYNTAX INTEGER { dual (0), single (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line dual channel status: dual/single channel." ::= { nsDemodConfigLine 6 } nsDemodConfigLineNoneLinearMode OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line none linear mode: off/on." ::= { nsDemodConfigLine 7 } nsDemodConfigLineAcmMode OBJECT-TYPE SYNTAX INTEGER { disable (0), enableCh1 (1), enableCh2 (2), enableCh1Ch2 (3), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line ACM mode: enable/disable." ::= { nsDemodConfigLine 8 } nsDemodConfigLineAcmServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line ACM server address." ::= { nsDemodConfigLine 9 } nsDemodConfigLineAcmMargin OBJECT-TYPE SYNTAX Integer32 (0..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is no longer supported" ::= { nsDemodConfigLine 10 } nsDemodConfigLineGoldSeq OBJECT-TYPE SYNTAX Integer32 (0..262141) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line golden sequence." ::= { nsDemodConfigLine 11 } nsDemodConfigLineAutoCcmMode OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line Auto CCM mode: enable/disable." ::= { nsDemodConfigLine 12 } nsDemodConfigLineLOFreq OBJECT-TYPE SYNTAX Unsigned32 (0..4000000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line LO frequency in 10Hrz." ::= { nsDemodConfigLine 13 } nsDemodConfigLineInputLevelMode OBJECT-TYPE SYNTAX INTEGER { constantPower (0), constantEnvelope (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line input level mode: constant power/constant envelope." ::= { nsDemodConfigLine 14 } nsDemodConfigLineAcmUseManagementIp OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is no longer supported" ::= { nsDemodConfigLine 15 } nsDemodConfigLineAcmIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is no longer supported" ::= { nsDemodConfigLine 16 } nsDemodConfigLineAcmIpNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is no longer supported" ::= { nsDemodConfigLine 17 } nsDemodConfigLineAcmIpNextHopIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is no longer supported" ::= { nsDemodConfigLine 18 } nsDemodConfigLineAcmMarginCh1 OBJECT-TYPE SYNTAX Integer32 (0..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line ACM margin for channel 2 in hundreds of dB." ::= { nsDemodConfigLine 19 } nsDemodConfigLineAcmMarginCh2 OBJECT-TYPE SYNTAX Integer32 (0..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line ACM margin for channel 2 in hundreds of dB." ::= { nsDemodConfigLine 20 } nsDemodConfigLineEchoCancellationMode OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), tx-hub-enable (2), rx-hub-enable (3), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line echo cancellation mode." ::= { nsDemodConfigLine 21 } nsDemodConfigLineEchoCancellationMinDelay OBJECT-TYPE SYNTAX Unsigned32 (0..650) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line echo cancellation min delay in mSec." ::= { nsDemodConfigLine 22 } nsDemodConfigLineEchoCancellationMaxDelay OBJECT-TYPE SYNTAX Unsigned32 (1..650) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line echo cancellation max delay in mSec." ::= { nsDemodConfigLine 23 } nsDemodConfigLineEchoCancellationTxFreqOffset OBJECT-TYPE SYNTAX Integer32 (-36000000..36000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line echo cancellation TX frequency offset in Hz." ::= { nsDemodConfigLine 24 } nsDemodConfigLineAdvancedAcmMode OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Line Advanced ACM: enable/disable." ::= { nsDemodConfigLine 25 } -- =================================================== nsDemodConfigChannel OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator channel parameters." ::= { nsDemodConfig 2 } nsDemodConfigChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodConfigChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Channel parameters" ::= { nsDemodConfigChannel 1 } nsDemodConfigChannelEntry OBJECT-TYPE SYNTAX DemodConfigChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each channel." INDEX { ifIndex } ::= { nsDemodConfigChannelTable 1 } DemodConfigChannelEntry ::= SEQUENCE { nsDemodConfigChIsiFrom INTEGER, nsDemodConfigChIsiTo INTEGER } nsDemodConfigChIsiFrom OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds channel ISI start range." ::= { nsDemodConfigChannelEntry 1 } nsDemodConfigChIsiTo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds channel ISI end range." ::= { nsDemodConfigChannelEntry 2 } -- =================================================== nsDemodConfigInterface OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator Interface parameters." ::= { nsDemodConfig 3 } nsDemodConfigInterfaceTestTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodConfigInterfaceTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Test interfaces" ::= { nsDemodConfigInterface 1 } nsDemodConfigInterfaceTestEntry OBJECT-TYPE SYNTAX DemodConfigInterfaceTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each test interface." INDEX { ifIndex } ::= { nsDemodConfigInterfaceTestTable 1 } DemodConfigInterfaceTestEntry ::= SEQUENCE { nsDemodConfigInterfaceTestSource INTEGER, nsDemodConfigInterfaceTestPattern INTEGER, nsDemodConfigInterfaceTestInvert INTEGER, nsDemodConfigInterfaceTestIgnoreBytes INTEGER } nsDemodConfigInterfaceTestSource OBJECT-TYPE SYNTAX INTEGER { disable (0), channel1 (1), channel2 (2), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Test interface source." ::= { nsDemodConfigInterfaceTestEntry 1 } nsDemodConfigInterfaceTestPattern OBJECT-TYPE SYNTAX INTEGER { pattern2Pwr7Neg1 (0), pattern2Pwr9Neg1 (1), pattern2Pwr11Neg1 (2), pattern2Pwr15Neg1 (3), pattern2Pwr20Neg1 (4), pattern2Pwr23Neg1 (5), pattern2Pwr29Neg1 (6), pattern2Pwr31Neg1 (7), patternAllZeros (8), patternAllOnes (9), patternBitAlternate (10), pattern2BitAlternate (11), pattern7Ones (12), pattern7Zeros (13), pattern6Ones (14), pattern6Zeros (15), pattern55AA (16), pattern6699 (17), patternC33C (18), pattern00FF (19), patternSAWTOOTH (20), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Test interface pattern. pattern2Pwr07Neg1 = 2^07-1 pattern2Pwr09Neg1 = 2^09-1 pattern2Pwr11Neg1 = 2^11-1 pattern2Pwr15Neg1 = 2^15-1 pattern2Pwr20Neg1 = 2^20-1 pattern2Pwr23Neg1 = 2^23-1 pattern2Pwr29Neg1 = 2^29-1 pattern2Pwr31Neg1 = 2^31-1 patternAllZeros = all zeros patternAllOnes = all ones patternBitAlternate = bit alternate pattern2BitAlternate= 2 bit alternate pattern7Ones = 1111111 (7 ones) pattern7Zeros = 0000000 (7 zeros) pattern6Ones = 111111 (6 ones) pattern6Zeros = 000000 (6 zeros) pattern55AA = 0x55AA pattern6699 = 0x6699 patternC33C = 0xC33C pattern00FF = 0x00FF patternSAWTOOTH = SAWTOOTH " ::= { nsDemodConfigInterfaceTestEntry 2 } nsDemodConfigInterfaceTestInvert OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Test interface invert." ::= { nsDemodConfigInterfaceTestEntry 3 } nsDemodConfigInterfaceTestIgnoreBytes OBJECT-TYPE SYNTAX Integer32 (0..262142) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Test interface ignore bytes." ::= { nsDemodConfigInterfaceTestEntry 4 } nsDemodConfigInterfaceASITable OBJECT-TYPE SYNTAX SEQUENCE OF DemodConfigInterfaceASIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ASI interfaces" ::= { nsDemodConfigInterface 2 } nsDemodConfigInterfaceASIEntry OBJECT-TYPE SYNTAX DemodConfigInterfaceASIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each ASI interface." INDEX { ifIndex } ::= { nsDemodConfigInterfaceASITable 1 } DemodConfigInterfaceASIEntry ::= SEQUENCE { nsDemodConfigInterfaceASISource INTEGER, nsDemodConfigInterfaceASIDataInvert INTEGER, nsDemodConfigInterfaceASIDataRateMode INTEGER, nsDemodConfigInterfaceASIDataRate Integer32, nsDemodConfigInterfaceASIDataRateAccuracy Integer32 } nsDemodConfigInterfaceASISource OBJECT-TYPE SYNTAX INTEGER { disable (0), channel1 (1), channel2 (2), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds ASI interface source." ::= { nsDemodConfigInterfaceASIEntry 1 } nsDemodConfigInterfaceASIDataInvert OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds ASI interface data invert." ::= { nsDemodConfigInterfaceASIEntry 2 } nsDemodConfigInterfaceASIDataRateMode OBJECT-TYPE SYNTAX INTEGER { auto (0), manual (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds ASI interface data rate mode: automatic/manual." ::= { nsDemodConfigInterfaceASIEntry 3 } nsDemodConfigInterfaceASIDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds ASI interface data rate in bPS." ::= { nsDemodConfigInterfaceASIEntry 4 } nsDemodConfigInterfaceASIDataRateAccuracy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds ASI interface data rate accuracy in hundreds of ppm." ::= { nsDemodConfigInterfaceASIEntry 5 } nsDemodConfigInterfaceEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF ModConfigInterfaceEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Ethernet interfaces" ::= { nsDemodConfigInterface 4 } nsDemodConfigInterfaceEthernetEntry OBJECT-TYPE SYNTAX ModConfigInterfaceEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each Ethernet interface." INDEX { ifIndex } ::= { nsDemodConfigInterfaceEthernetTable 1 } ModConfigInterfaceEthernetEntry ::= SEQUENCE { nsDemodConfigInterfaceEthernetSource INTEGER, nsDemodConfigInterfaceEthernetAutoNegotiation INTEGER, nsDemodConfigInterfaceEthernetSpeed INTEGER, nsDemodConfigInterfaceEthernetDuplex INTEGER, nsDemodConfigInterfaceEthernetEncapsulation INTEGER, nsDemodConfigInterfaceEthernetPid Integer32 } nsDemodConfigInterfaceEthernetSource OBJECT-TYPE SYNTAX INTEGER { disable (0), channel-1 (1), channel-2 (2), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface source" ::= { nsDemodConfigInterfaceEthernetEntry 1 } nsDemodConfigInterfaceEthernetAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface auto-negotiation status" ::= { nsDemodConfigInterfaceEthernetEntry 2 } nsDemodConfigInterfaceEthernetSpeed OBJECT-TYPE SYNTAX INTEGER { speed10 (0), speed100 (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface speed" ::= { nsDemodConfigInterfaceEthernetEntry 3 } nsDemodConfigInterfaceEthernetDuplex OBJECT-TYPE SYNTAX INTEGER { half (0), full (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface Duplex" ::= { nsDemodConfigInterfaceEthernetEntry 4 } nsDemodConfigInterfaceEthernetEncapsulation OBJECT-TYPE SYNTAX INTEGER { raw (0), nspe (1), gse (2), ule (3), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface Encapsulation" ::= { nsDemodConfigInterfaceEthernetEntry 5 } nsDemodConfigInterfaceEthernetPid OBJECT-TYPE SYNTAX Integer32 (32..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds Ethernet interface PID value" ::= { nsDemodConfigInterfaceEthernetEntry 6 } nsDemodConfigInterfaceGigETable OBJECT-TYPE SYNTAX SEQUENCE OF ModConfigInterfaceGigEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of GigE interfaces" ::= { nsDemodConfigInterface 5 } nsDemodConfigInterfaceGigEEntry OBJECT-TYPE SYNTAX ModConfigInterfaceGigEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each gigE interface." INDEX { ifIndex } ::= { nsDemodConfigInterfaceGigETable 1 } ModConfigInterfaceGigEEntry ::= SEQUENCE { nsDemodConfigInterfaceGigEAutoNegotiation INTEGER, nsDemodConfigInterfaceGigESpeed INTEGER, nsDemodConfigInterfaceGigEDuplex INTEGER, nsDemodConfigInterfaceGigEPortType INTEGER } nsDemodConfigInterfaceGigEAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds GigE interface auto-negotiation status" ::= { nsDemodConfigInterfaceGigEEntry 1 } nsDemodConfigInterfaceGigESpeed OBJECT-TYPE SYNTAX INTEGER { speed10 (0), speed100 (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds GigE interface speed" ::= { nsDemodConfigInterfaceGigEEntry 2 } nsDemodConfigInterfaceGigEDuplex OBJECT-TYPE SYNTAX INTEGER { half (0), full (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds GigE interface Duplex" ::= { nsDemodConfigInterfaceGigEEntry 3 } nsDemodConfigInterfaceGigEPortType OBJECT-TYPE SYNTAX INTEGER { rj45 (0), sfp (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds GigE interface port type value" ::= { nsDemodConfigInterfaceGigEEntry 5 } -- =================================================== nsDemodConfigDiseqc OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator DiSEqC parameters." ::= { nsDemodConfig 4 } nsDemodConfigDiseqcTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodConfigDiseqcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Diseqc parameters" ::= { nsDemodConfigDiseqc 1 } nsDemodConfigDiseqcEntry OBJECT-TYPE SYNTAX DemodConfigDiseqcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each DiSEqC." INDEX { nsDemodConfigDiseqcName } ::= { nsDemodConfigDiseqcTable 1 } DemodConfigDiseqcEntry ::= SEQUENCE { nsDemodConfigDiseqcName DisplayString, nsDemodConfigDiseqcHeaderBytes Counter64, nsDemodConfigDiseqcNumDataBytes Unsigned32, nsDemodConfigDiseqcToneBurstMode INTEGER, nsDemodConfigDiseqcNotifyRowStatus RowStatus } nsDemodConfigDiseqcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter holds DiSEqC command's name." ::= { nsDemodConfigDiseqcEntry 1 } nsDemodConfigDiseqcHeaderBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter holds DiSEqC command's header bytes." ::= { nsDemodConfigDiseqcEntry 2 } nsDemodConfigDiseqcNumDataBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter holds DiSEqC command's number of data bytes." ::= { nsDemodConfigDiseqcEntry 3 } nsDemodConfigDiseqcToneBurstMode OBJECT-TYPE SYNTAX INTEGER { auto (0), unmodulated (1), modulated (2), none (3), notApplicable (255) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter holds DiSEqC command's tone burst mode." ::= { nsDemodConfigDiseqcEntry 4 } nsDemodConfigDiseqcNotifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create new rows or delete in the table. Note that all rows are active(1) at all times, since default values are given to empty parameters. Value createAndGo(4) is used when all row parameters are inserted at once, while createAndWait(5) is used to create row with default values. Value destroy(6) is used to remove a row" ::= { nsDemodConfigDiseqcEntry 5 } -- == run command nsDemodConfigDiseqcExecuteCmd OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds parameters to execute DiSEqC command." ::= { nsDemodConfigDiseqc 2 } nsDemodConfigDiseqcExecuteCmdName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds DiSEqC command's name to execute." ::= { nsDemodConfigDiseqcExecuteCmd 1 } nsDemodConfigDiseqcExecuteCmdData OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds DiSEqC command's data for execution." ::= { nsDemodConfigDiseqcExecuteCmd 2 } nsDemodConfigDiseqcExecuteCmdExecute OBJECT-TYPE SYNTAX INTEGER { none (0), run (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter holds allow to start DiSEqC command execution." ::= { nsDemodConfigDiseqcExecuteCmd 3 } -- =================================================== nsDemodMonitor OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator status and alarms." ::= { nsDemodulator 2 } nsDemodMonitorLine OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator line statuses." ::= { nsDemodMonitor 1 } nsDemodMonitorLineMode OBJECT-TYPE SYNTAX INTEGER { dvbs (0), dsng (1), dvbs2 (2), ns3 (3), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line mode status." ::= { nsDemodMonitorLine 1 } nsDemodMonitorLineState OBJECT-TYPE SYNTAX INTEGER { no-sync (0), sync (1), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line state status." ::= { nsDemodMonitorLine 2 } nsDemodMonitorLineSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Pilot SNR status in hundreds of dB." ::= { nsDemodMonitorLine 3 } nsDemodMonitorLineCompositePower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Composite power status in hundreds of dBm." ::= { nsDemodMonitorLine 4 } nsDemodMonitorLineSymbolRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Symbol rate status in SPS." ::= { nsDemodMonitorLine 5 } nsDemodMonitorLineRollOff OBJECT-TYPE SYNTAX INTEGER { rollOff005 (0), rollOff010 (1), rollOff015 (2), rollOff020 (3), rollOff025 (4), rollOff035 (5), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 " ::= { nsDemodMonitorLine 6 } nsDemodMonitorLineRFFreq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line RF frequency status in 10Hz." ::= { nsDemodMonitorLine 7 } nsDemodMonitorLineDataRateCh1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Data rate channel 1 status in bit/sec." ::= { nsDemodMonitorLine 8 } nsDemodMonitorLineDataRateCh2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Data rate channel 2 status in bit/sec." ::= { nsDemodMonitorLine 9 } nsDemodMonitorLinePrbsDataBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds PRBS Data Rate." ::= { nsDemodMonitorLine 10 } nsDemodMonitorLinePrbsErrorBits OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds PRBS Error bits." ::= { nsDemodMonitorLine 11 } nsDemodMonitorLinePrbsErrorBitsRate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds PRBS Error bits rate." ::= { nsDemodMonitorLine 12 } nsDemodMonitorLineFERFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds FER frames." ::= { nsDemodMonitorLine 13 } nsDemodMonitorLineFERErrorFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds FER error frames." ::= { nsDemodMonitorLine 14 } nsDemodMonitorLineFERErrorFramesRate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds FER error frames rate." ::= { nsDemodMonitorLine 15 } nsDemodMonitorModeCodeTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodModeCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Mode code status fields" ::= { nsDemodMonitorLine 16 } nsDemodMonitorModeCodeEntry OBJECT-TYPE SYNTAX DemodModeCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each mode code option." INDEX { nsDemodMonitorModeCodeModulation, nsDemodMonitorModeCodeFEC, nsDemodMonitorModeCodePilot , nsDemodMonitorModeCodeFrameSize} ::= { nsDemodMonitorModeCodeTable 1 } DemodModeCodeEntry ::= SEQUENCE { nsDemodMonitorModeCodeModulation INTEGER, nsDemodMonitorModeCodeFEC INTEGER, nsDemodMonitorModeCodePilot INTEGER, nsDemodMonitorModeCodeFrameSize INTEGER, nsDemodMonitorModeCodeFrames INTEGER, nsDemodMonitorModeCodeFramesErr INTEGER, nsDemodMonitorModeCodeFramesErrRate DisplayString, nsDemodMonitorModeCodeFramesLinkMargin DisplayString, nsDemodMonitorModeCodeFramesSnr DisplayString, nsDemodMonitorModeCodeFramesDesignatedToUnit DisplayString } nsDemodMonitorModeCodeModulation OBJECT-TYPE SYNTAX INTEGER { modulationBpsk (0), modulationQpsk (1), modulation8Psk (2), modulation16Qam (3), modulation16Apsk (4), modulation32Apsk (5), modulation64Apsk (6), notApplicable (255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter holds mode code modulation." ::= { nsDemodMonitorModeCodeEntry 1 } nsDemodMonitorModeCodeFEC OBJECT-TYPE SYNTAX INTEGER { fec1Div5 (0), fec1Div4 (1), fec1Div4Short (2), fec1Div3 (3), fec2Div5 (4), fec13Div30 (5), fec4Div9 (6), fec7Div15 (7), fec22Div45 (8), fec1Div2 (9), fec1Div2Short (10), fec8Div15 (11), fec5Div9 (12), fec17Div30 (13), fec3Div5 (14), fec28Div45 (15), fec19Div30 (16), fec2Div3 (17), fec32Div45 (18), fec11Div15 (19), fec3Div4 (20), fec3Div4Short (21), fec7Div9 (22), fec4Div5 (23), fec4Div5Short (24), fec37Div45 (25), fec5Div6 (26), fec5Div6Short (27), fec7Div8 (28), fec8Div9 (29), fec9Div10 (30), notApplicable (255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div4Short = 1/4 DVBS2 SHORT FRAME fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec1Div2Short = 1/2 DVBS2 SHORT FRAME fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec3Div4Short = 3/4 DVBS2 SHORT FRAME fec7Div9 = 7/9 fec4Div5 = 4/5 fec4Div5Short = 4/5 DVBS2 SHORT FRAME fec37Div45 = 37/45 fec5Div6 = 5/6 fec5Div6Short = 5/6 DVBS2 SHORT FRAME fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 " ::= { nsDemodMonitorModeCodeEntry 2 } nsDemodMonitorModeCodePilot OBJECT-TYPE SYNTAX INTEGER { pilotNo (0), pilot16Slots (1), pilot8Slots (2), notApplicable (255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorModeCodeEntry 3 } nsDemodMonitorModeCodeFrameSize OBJECT-TYPE SYNTAX INTEGER { normal (0), short (1), notApplicable (255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorModeCodeEntry 4 } nsDemodMonitorModeCodeFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorModeCodeEntry 5 } nsDemodMonitorModeCodeFramesErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorModeCodeEntry 6 } nsDemodMonitorModeCodeFramesErrRate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code FER." ::= { nsDemodMonitorModeCodeEntry 7 } nsDemodMonitorModeCodeFramesLinkMargin OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code Link Margin." ::= { nsDemodMonitorModeCodeEntry 8 } nsDemodMonitorModeCodeFramesSnr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code Snr." ::= { nsDemodMonitorModeCodeEntry 9 } nsDemodMonitorModeCodeFramesDesignatedToUnit OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds the information whether the mode code was sent to this remote or not" ::= { nsDemodMonitorModeCodeEntry 10 } nsDemodMonitorLineLinkMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Link Margin in hundreds of dB." ::= { nsDemodMonitorLine 17 } nsDemodMonitorLineSymbolRateOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Symbol-rate offset status in thousands of PPM." ::= { nsDemodMonitorLine 18 } nsDemodMonitorLineFrequencyOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line frequency offset status in Hz." ::= { nsDemodMonitorLine 19 } nsDemodMonitorLinePrbsSource OBJECT-TYPE SYNTAX INTEGER { disable (0), channel1 (1), channel2 (2), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds PRBS source." ::= { nsDemodMonitorLine 20 } nsDemodMonitorLineChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodLineStatusChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Channel specific status fields" ::= { nsDemodMonitorLine 21 } nsDemodMonitorChannelEntry OBJECT-TYPE SYNTAX DemodLineStatusChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each channel option." INDEX { ifIndex} ::= { nsDemodMonitorLineChannelTable 1 } DemodLineStatusChannelEntry ::= SEQUENCE { nsDemodMonitorLineChannelDataRate INTEGER, nsDemodMonitorLineChannelLinkMargin INTEGER, nsDemodMonitorLineChannelLockStatus INTEGER, nsDemodMonitorLineChannelSNR INTEGER, nsDemodMonitorLineChannelModulation INTEGER, nsDemodMonitorLineChannelFEC INTEGER, nsDemodMonitorLineChannelPilot INTEGER, nsDemodMonitorLineChannelFrameSize INTEGER, nsDemodMonitorLineChannelFrames INTEGER, nsDemodMonitorLineChannelFramesErr INTEGER, nsDemodMonitorLineChannelFramesErrRate DisplayString } nsDemodMonitorLineChannelDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Channel Data rate status in bit/sec." ::= { nsDemodMonitorChannelEntry 1 } nsDemodMonitorLineChannelLinkMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Link Margin in hundreds of dB." ::= { nsDemodMonitorChannelEntry 2 } nsDemodMonitorLineChannelLockStatus OBJECT-TYPE SYNTAX INTEGER { unlocked (0), locked (1), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Channel lock status." ::= { nsDemodMonitorChannelEntry 3 } nsDemodMonitorLineChannelSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Data SNR status in hundreds of dB." ::= { nsDemodMonitorChannelEntry 4 } nsDemodMonitorLineChannelModulation OBJECT-TYPE SYNTAX INTEGER { modulationBpsk (0), modulationQpsk (1), modulation8Psk (2), modulation16Qam (3), modulation16Apsk (4), modulation32Apsk (5), modulation64Apsk (6), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code modulation." ::= { nsDemodMonitorChannelEntry 5 } nsDemodMonitorLineChannelFEC OBJECT-TYPE SYNTAX INTEGER { fec1Div5 (0), fec1Div4 (1), fec1Div3 (2), fec2Div5 (3), fec13Div30 (4), fec4Div9 (5), fec7Div15 (6), fec22Div45 (7), fec1Div2 (8), fec8Div15 (9), fec5Div9 (10), fec17Div30 (11), fec3Div5 (12), fec28Div45 (13), fec19Div30 (14), fec2Div3 (15), fec32Div45 (16), fec11Div15 (17), fec3Div4 (18), fec7Div9 (19), fec4Div5 (20), fec37Div45 (21), fec5Div6 (22), fec7Div8 (23), fec8Div9 (24), fec9Div10 (25), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec7Div9 = 7/9 fec4Div5 = 4/5 fec37Div45 = 37/45 fec5Div6 = 5/6 fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 " ::= { nsDemodMonitorChannelEntry 6 } nsDemodMonitorLineChannelPilot OBJECT-TYPE SYNTAX INTEGER { pilotNo (0), pilot16Slots (1), pilot8Slots (2), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorChannelEntry 7 } nsDemodMonitorLineChannelFrameSize OBJECT-TYPE SYNTAX INTEGER { normal (0), short (1), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorChannelEntry 8 } nsDemodMonitorLineChannelFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorChannelEntry 9 } nsDemodMonitorLineChannelFramesErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code pilot." ::= { nsDemodMonitorChannelEntry 10 } nsDemodMonitorLineChannelFramesErrRate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds mode code FER." ::= { nsDemodMonitorChannelEntry 11 } nsDemodMonitorLineSignalPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Line Signal Power status in hundreds of dBm." ::= { nsDemodMonitorLine 22 } nsDemodMonitorLineCntrClrCmd OBJECT-TYPE SYNTAX INTEGER { none (0), execute (1), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear Line counters command" ::= { nsDemodMonitorLine 23 } nsDemodMonitorLineEcState OBJECT-TYPE SYNTAX INTEGER { unlock (0), lock (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Echo Cancellation State." ::= { nsDemodMonitorLine 24 } nsDemodMonitorLineEcSatDelay OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Echo Cancellation satellite delay in ms." ::= { nsDemodMonitorLine 25 } nsDemodMonitorLineEcTxFreqOffset OBJECT-TYPE SYNTAX Integer32 (-36000000..36000000) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Echo Cancellation TX frequency offset in Hz." ::= { nsDemodMonitorLine 26 } nsDemodMonitorLineEcGainDiff OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds Echo Cancellation Gain Difference in hundreds of dBm." ::= { nsDemodMonitorLine 27 } -- =================================================== nsDemodMonitorInterface OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator interface statuses." ::= { nsDemodMonitor 2 } nsDemodMonitorInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodMonitorInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statuses" ::= { nsDemodMonitorInterface 1 } nsDemodMonitorInterfaceEntry OBJECT-TYPE SYNTAX DemodMonitorInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each interface." INDEX { ifIndex } ::= { nsDemodMonitorInterfaceTable 1 } DemodMonitorInterfaceEntry ::= SEQUENCE { nsDemodMonitorInterfaceName DisplayString, nsDemodMonitorInterfaceSource DisplayString, nsDemodMonitorInterfaceRate DisplayString } nsDemodMonitorInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of interface" ::= { nsDemodMonitorInterfaceEntry 1 } nsDemodMonitorInterfaceSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Source of interface" ::= { nsDemodMonitorInterfaceEntry 2 } nsDemodMonitorInterfaceRate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds interface source rate." ::= { nsDemodMonitorInterfaceEntry 3 } -- =================================================== nsDemodMonitorSystem OBJECT-IDENTITY STATUS current DESCRIPTION "Demodulator MIB branch that holds all Demodulator system statuses." ::= { nsDemodMonitor 3 } nsDemodMonitorSystemFPGATmp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds system FPGA temperature status in hundreds of Celsius degrees." ::= { nsDemodMonitorSystem 1 } nsDemodMonitorSystemBoardTmp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds system board temperature status in hundreds of Celsius degrees." ::= { nsDemodMonitorSystem 2 } nsDemodMonitorSystem10MHrzClkSource OBJECT-TYPE SYNTAX INTEGER { internal (0), external (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds system 10MHrz clock source." ::= { nsDemodMonitorSystem 3 } nsDemodMonitorSystemRefClkOut OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds system ref clock out." ::= { nsDemodMonitorSystem 4 } nsDemodMonitorSystemLnbRefClk OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), notApplicable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter holds system LNB ref clock." ::= { nsDemodMonitorSystem 5 } -- =================================================== nsDemodMonitorEthernet OBJECT-IDENTITY STATUS current DESCRIPTION "Common MIB branch that holds all Ethernet statistics." ::= { nsDemodMonitor 4 } nsDemodMonitorEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF DemodEthernetStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Ethernet Statistics" ::= { nsDemodMonitorEthernet 1 } nsDemodMonitorEthernetEntry OBJECT-TYPE SYNTAX DemodEthernetStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual row in table for each event." INDEX { nsDemodMonitorEthernetStatisticsNumber } ::= { nsDemodMonitorEthernetTable 1 } DemodEthernetStatisticsEntry ::= SEQUENCE { nsDemodMonitorEthernetStatisticsNumber Counter32, nsDemodMonitorEthernetStatisticsName DisplayString, nsDemodMonitorEthernetStatisticsValueA Integer32, nsDemodMonitorEthernetStatisticsValueB Integer32 } nsDemodMonitorEthernetStatisticsNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Statistics Number" ::= { nsDemodMonitorEthernetEntry 1 } nsDemodMonitorEthernetStatisticsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Ethernet Statistics" ::= { nsDemodMonitorEthernetEntry 2 } nsDemodMonitorEthernetStatisticsValueA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Ethernet Statistics" ::= { nsDemodMonitorEthernetEntry 3 } nsDemodMonitorEthernetStatisticsValueB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Ethernet Statistics" ::= { nsDemodMonitorEthernetEntry 4 } -- =================================================== END ---------------------------------------------- -- NOVELSAT-DEMODULATOR.mib -- ----------------------------------------------