NNC-ATM-CONGESTIONSTATISTICS-MIB :: nncAtmCongStatsCurrentLongIntvlAlarmStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNNC-ATM-CONGESTIONSTATISTICS-MIBnncAtmCongStatsCurrentLongIntvlAlarmStatus

nncAtmCongStatsCurrentLongIntvlAlarmStatus

Module: NNC-ATM-CONGESTIONSTATISTICS-MIB

OID (symbolic): NNC-ATM-CONGESTIONSTATISTICS-MIB::nncAtmCongStatsCurrentLongIntvlAlarmStatus

OID (numeric): 1.3.6.1.4.1.123.3.63.1.5.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Current alarm status - either ON or OFF. When a congestion point has been severely congested for longer than the allowable threshold time the value of this object is set to congStatsAlarmOn. When severe congestion clears, the value of this object is set to congStatsAlarmOff.

What is nncAtmCongStatsCurrentLongIntvlAlarmStatus?

This read-only INTEGER reports congStatsAlarmOn(1) or congStatsAlarmOff(2) for the congestion alarm as it applies to today's still-open 1-day interval, on when severe congestion has persisted past the allowable threshold and off once cleared. An admin reads this as the daily-interval-scoped alarm flag, useful for confirming whether today has triggered the severe-congestion alarm at all. Seeing nncAtmCongStatsCurrentLongIntvlAlarmStatus at congStatsAlarmOn(1) confirms today's severe congestion has already crossed the alarm threshold.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.123.3.63.1.5.1.14
snmpwalk -v2c -c public <target> NNC-ATM-CONGESTIONSTATISTICS-MIB::nncAtmCongStatsCurrentLongIntvlAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.123.3.63.1.5.1.14.1
snmpget -v2c -c public <target> NNC-ATM-CONGESTIONSTATISTICS-MIB::nncAtmCongStatsCurrentLongIntvlAlarmStatus.1

Start monitoring Newbridge Networks 36170 ATM switch (SHub Diablo/NSX/Eagle hardware) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NNC-ATM-CONGESTIONSTATISTICS-MIB::nncAtmCongStatsCurrentLongIntvlAlarmStatus OID value, configure state conditions and alerts, and monitor any Newbridge Networks 36170 ATM switch (SHub Diablo/NSX/Eagle hardware) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.123newbridgeNNCGNI0001-SMI
1.3.6.1.4.1.123.3nncExtensionsNNCGNI0001-SMI
Numeric OIDNameModule
1.3.6.1.4.1.123.3.63nncAtmCongestionStatisticsNNC-ATM-CONGESTIONSTATISTICS-MIB
1.3.6.1.4.1.123.3.63.1nncAtmCongStatsObjectsNNC-ATM-CONGESTIONSTATISTICS-MIB
1.3.6.1.4.1.123.3.63.1.5nncAtmCongStatsCurrentLongIntvlTableNNC-ATM-CONGESTIONSTATISTICS-MIB
1.3.6.1.4.1.123.3.63.1.5.1nncAtmCongStatsCurrentLongIntvlEntryNNC-ATM-CONGESTIONSTATISTICS-MIB
1.3.6.1.4.1.123.3.63.1.5.1.14nncAtmCongStatsCurrentLongIntvlAlarmStatusNNC-ATM-CONGESTIONSTATISTICS-MIB