NMS-HAL-TRAP :: alarmThreshold

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NMS-HAL-TRAP › alarmThreshold

alarmThreshold

Module: NMS-HAL-TRAP

OID (symbolic): NMS-HAL-TRAP::alarmThreshold

OID (numeric): 1.3.6.1.4.1.11606.10.3.11.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Percentage of maximal value. For mac address alarm and port rate alarm.

What is alarmThreshold?

This read-only integer, 0 to 100, is the percentage of the maximal value used to trigger MAC address alarms and port rate alarms. Admins reference this threshold to understand at what percentage of maxMacAddrNum, or of link rate, an alarm condition is triggered on this device. For example, a value of 90 means an alarm fires once MAC address usage or port rate utilization reaches 90 percent of its maximum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11606.10.3.11.3
snmpwalk -v2c -c public <target> NMS-HAL-TRAP::alarmThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11606.10.3.11.3.1
snmpget -v2c -c public <target> NMS-HAL-TRAP::alarmThreshold.1

Start monitoring nms Co., Ltd. switching hardware (HAL fault traps, vendor unidentified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS-HAL-TRAP::alarmThreshold OID value, configure state conditions and alerts, and monitor any nms Co., Ltd. switching hardware (HAL fault traps, vendor unidentified) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11606pbnPBN-ROOT
1.3.6.1.4.1.11606.10nmsNMS-SMI
1.3.6.1.4.1.11606.10.3nmstemporaryNMS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.11606.10.3.11nmsHalTrapNMS-HAL-TRAP
1.3.6.1.4.1.11606.10.3.11.3alarmThresholdNMS-HAL-TRAP