All MIBs › NB30MIB › nb30PortMaxRetry
nb30PortMaxRetry
Module: NB30MIB
OID (symbolic): NB30MIB::nb30PortMaxRetry
OID (numeric): 1.3.6.1.4.1.52.1.6.12.4.1.1.28
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Max number of retries for the Redundant Port Algorithm on the NB30. Valid range is 2 - 99 retries
What is nb30PortMaxRetry?
Sets the maximum number of retries (2-99) the Redundant Port Algorithm attempts on this port before deciding it has failed and triggering a failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.4.1.1.28 snmpwalk -v2c -c public <target> NB30MIB::nb30PortMaxRetry
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.4.1.1.28.1 snmpget -v2c -c public <target> NB30MIB::nb30PortMaxRetry.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1.6.12.4.1.1.28.1 i <value>
Start monitoring NB30 bridge/DSX WAN interconnect device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NB30MIB::nb30PortMaxRetry OID value, configure state conditions and alerts, and monitor any NB30 bridge/DSX WAN interconnect device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.1 | commsDevice | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6 | subsystem | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6.12 | nb30Rev1 | IRM-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.6.12.4 | nb30Port | NB30MIB |
| 1.3.6.1.4.1.52.1.6.12.4.1 | nb30PortTable | NB30MIB |
| 1.3.6.1.4.1.52.1.6.12.4.1.1 | nb30PortEntry | NB30MIB |
| 1.3.6.1.4.1.52.1.6.12.4.1.1.28 | nb30PortMaxRetry | NB30MIB |