All MIBs › NB30MIB › nb30DsxLoopDn
nb30DsxLoopDn
Module: NB30MIB
OID (symbolic): NB30MIB::nb30DsxLoopDn
OID (numeric): 1.3.6.1.4.1.52.1.6.12.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The loop down command for the DSX-1 Remote Interface.
What is nb30DsxLoopDn?
A one-shot command that takes the DSX-1 remote interface out of loopback mode when set to loopDown(1), restoring normal pass-through operation after a loop test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.2.2 snmpwalk -v2c -c public <target> NB30MIB::nb30DsxLoopDn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.2.2.1 snmpget -v2c -c public <target> NB30MIB::nb30DsxLoopDn.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1.6.12.2.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nb30DsxLoopDn.1
Start monitoring NB30 bridge/DSX WAN interconnect device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NB30MIB::nb30DsxLoopDn OID value, configure state conditions and alerts, and monitor any NB30 bridge/DSX WAN interconnect device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.1 | commsDevice | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6 | subsystem | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6.12 | nb30Rev1 | IRM-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.6.12.2 | nb30Dsx | NB30MIB |
| 1.3.6.1.4.1.52.1.6.12.2.2 | nb30DsxLoopDn | NB30MIB |