All MIBs › NB30MIB › nb30DeviceRestoreSettings
nb30DeviceRestoreSettings
Module: NB30MIB
OID (symbolic): NB30MIB::nb30DeviceRestoreSettings
OID (numeric): 1.3.6.1.4.1.52.1.6.12.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Restore the following settings to their default values: Bridge Name to CABLETRON REMOTE BRIDGE, Location to LOCAL, Enet Port 1 Name to ETHERNET PORT 1, Enet Port 2 Name to ETHERNET PORT 2, Remote Port Name to REMOTE PORT, Enet Port 1 Network Name to LAN_1, Enet Port 2 Network Name to LAN_2, Defualt Enet Port to Port 1, Enable Redundancy to NO, Port 1 and Port 2 Poll Address to 00-00-00-00-00-00, Port 1 and Port 2 Poll Interval to 5 Seconds, Port 1 and Port 2 Max Retries to 6, Remote Port Network Name to REMOTE LINK, Ageing Time for Acquired Database to 300 seconds, Place seventeen default multicast addresses into the permanent and acquired databases, Type of Spanning Tree to 802.1, Type of Filtering to IEEE 802.1, Bridge Max Age to 20 seconds, Bridge Forward Delay to 15 seconds, Bridge Hello Time to 2 seconds, Bridge Priority to 8000, Port 1 Priority to 80, Port 2 Priority to 80, Port 1 Path Cost to 1000, Port 2 Path Cost to 1000, Number of Restarts to 0.
What is nb30DeviceRestoreSettings?
A one-shot control that resets the bridge's configuration -- names, ports, spanning tree timers, filter databases and more -- back to factory defaults when set to restoreSettings(1). Admins use this to recover from a misconfiguration rather than reconfiguring every parameter individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.1.2 snmpwalk -v2c -c public <target> NB30MIB::nb30DeviceRestoreSettings
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1.6.12.1.2.1 snmpget -v2c -c public <target> NB30MIB::nb30DeviceRestoreSettings.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1.6.12.1.2.1 i <value>
Start monitoring NB30 bridge/DSX WAN interconnect device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NB30MIB::nb30DeviceRestoreSettings OID value, configure state conditions and alerts, and monitor any NB30 bridge/DSX WAN interconnect device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.1 | commsDevice | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6 | subsystem | Cabletron-MIB |
| 1.3.6.1.4.1.52.1.6.12 | nb30Rev1 | IRM-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.6.12.1 | nb30Device | NB30MIB |
| 1.3.6.1.4.1.52.1.6.12.1.2 | nb30DeviceRestoreSettings | NB30MIB |