MPLS-LDP-STD-MIB :: mplsOutSegmentLdpLspLabelType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-LDP-STD-MIBmplsOutSegmentLdpLspLabelType

mplsOutSegmentLdpLspLabelType

Module: MPLS-LDP-STD-MIB

OID (symbolic): MPLS-LDP-STD-MIB::mplsOutSegmentLdpLspLabelType

OID (numeric): 1.3.6.1.2.1.10.166.4.1.3.7.1.2

Node type: OBJECT-TYPE

Type: MplsLdpLabelType

Access: read-only

Description: The Layer 2 Label Type.

What is mplsOutSegmentLdpLspLabelType?

This OID reports the Layer 2 label type used for the outgoing label on this LDP-signaled MPLS out-segment (the transmitting side of a label-switched path at this LSR). Admins use it to confirm what kind of label encoding (e.g., generic, ATM, Frame Relay) is in effect on the egress side of this LSP hop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.7.1.2
snmpwalk -v2c -c public <target> MPLS-LDP-STD-MIB::mplsOutSegmentLdpLspLabelType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.7.1.2.1
snmpget -v2c -c public <target> MPLS-LDP-STD-MIB::mplsOutSegmentLdpLspLabelType.1

Start monitoring Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LDP-STD-MIB::mplsOutSegmentLdpLspLabelType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.4mplsLdpStdMIBMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1mplsLdpObjectsMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3mplsLdpSessionObjectsMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.7mplsOutSegmentLdpLspTableMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.7.1mplsOutSegmentLdpLspEntryMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.7.1.2mplsOutSegmentLdpLspLabelTypeMPLS-LDP-STD-MIB