All MIBs › MPLS-LDP-STD-MIB › mplsLdpPeerPathVectorLimit
mplsLdpPeerPathVectorLimit
Module: MPLS-LDP-STD-MIB
OID (symbolic): MPLS-LDP-STD-MIB::mplsLdpPeerPathVectorLimit
OID (numeric): 1.3.6.1.2.1.10.166.4.1.3.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If the value of this object is 0 (zero) then Loop Dection for Path Vectors for this Peer is disabled.
Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors for this Peer is enabled and the Path Vector Limit is this value.
What is mplsLdpPeerPathVectorLimit?
This OID reports this peer's Path Vector loop-detection limit, with 0 meaning Path Vector loop detection is disabled for this peer, and any nonzero value both enabling it and specifying the limit, per RFC 3036 sections 2.8/3.4.5. Admins compare this to the local mplsLdpEntityPathVectorLimit to confirm both ends of a session agree on loop-detection behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.2.1.3 snmpwalk -v2c -c public <target> MPLS-LDP-STD-MIB::mplsLdpPeerPathVectorLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.2.1.3.1 snmpget -v2c -c public <target> MPLS-LDP-STD-MIB::mplsLdpPeerPathVectorLimit.1
Start monitoring Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LDP-STD-MIB::mplsLdpPeerPathVectorLimit OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.166.4 | mplsLdpStdMIB | MPLS-LDP-STD-MIB |
| 1.3.6.1.2.1.10.166.4.1 | mplsLdpObjects | MPLS-LDP-STD-MIB |
| 1.3.6.1.2.1.10.166.4.1.3 | mplsLdpSessionObjects | MPLS-LDP-STD-MIB |
| 1.3.6.1.2.1.10.166.4.1.3.2 | mplsLdpPeerTable | MPLS-LDP-STD-MIB |
| 1.3.6.1.2.1.10.166.4.1.3.2.1 | mplsLdpPeerEntry | MPLS-LDP-STD-MIB |
| 1.3.6.1.2.1.10.166.4.1.3.2.1.3 | mplsLdpPeerPathVectorLimit | MPLS-LDP-STD-MIB |