MPLS-LDP-STD-MIB :: mplsInSegmentLdpLspLabelType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-LDP-STD-MIBmplsInSegmentLdpLspLabelType

mplsInSegmentLdpLspLabelType

Module: MPLS-LDP-STD-MIB

OID (symbolic): MPLS-LDP-STD-MIB::mplsInSegmentLdpLspLabelType

OID (numeric): 1.3.6.1.2.1.10.166.4.1.3.6.1.2

Node type: OBJECT-TYPE

Type: MplsLdpLabelType

Access: read-only

Description: The Layer 2 Label Type.

What is mplsInSegmentLdpLspLabelType?

This OID reports the Layer 2 label type used for the incoming label on this LDP-signaled MPLS in-segment (the receiving side of a label-switched path at this LSR). Admins use it to confirm what kind of label encoding (e.g., generic, ATM, Frame Relay) is in effect on the ingress side of this LSP hop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.6.1.2
snmpwalk -v2c -c public <target> MPLS-LDP-STD-MIB::mplsInSegmentLdpLspLabelType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.4.1.3.6.1.2.1
snmpget -v2c -c public <target> MPLS-LDP-STD-MIB::mplsInSegmentLdpLspLabelType.1

Start monitoring Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LDP-STD-MIB::mplsInSegmentLdpLspLabelType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (any MPLS-capable Label Switching Router, LDP) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.4mplsLdpStdMIBMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1mplsLdpObjectsMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3mplsLdpSessionObjectsMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.6mplsInSegmentLdpLspTableMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.6.1mplsInSegmentLdpLspEntryMPLS-LDP-STD-MIB
1.3.6.1.2.1.10.166.4.1.3.6.1.2mplsInSegmentLdpLspLabelTypeMPLS-LDP-STD-MIB