MPLS-FRR-STD-MIB :: mplsFrrFacRouteDBProtTunStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MPLS-FRR-STD-MIB › mplsFrrFacRouteDBProtTunStatus

mplsFrrFacRouteDBProtTunStatus

Module: MPLS-FRR-STD-MIB

OID (symbolic): MPLS-FRR-STD-MIB::mplsFrrFacRouteDBProtTunStatus

OID (numeric): 1.3.6.1.2.1.113.2.3.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Specifies the state of the protected tunnel.

active This tunnel's label has been placed in the LFIB and is ready to be applied to incoming packets.

ready - This tunnel's label entry has been created but is not yet in the LFIB.

partial - This tunnel's label entry as not been fully created.

What is mplsFrrFacRouteDBProtTunStatus?

The setup state of this protected tunnel's fast-reroute label: active means the label is installed in the forwarding table (LFIB) and ready for use, ready means the label exists but isn't in the LFIB yet, and partial means the label entry isn't fully built.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.113.2.3.1.1.10
snmpwalk -v2c -c public <target> MPLS-FRR-STD-MIB::mplsFrrFacRouteDBProtTunStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.113.2.3.1.1.10.1
snmpget -v2c -c public <target> MPLS-FRR-STD-MIB::mplsFrrFacRouteDBProtTunStatus.1

Start monitoring Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-FRR-STD-MIB::mplsFrrFacRouteDBProtTunStatus OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.113mplsFrrMIBMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.2mplsFrrObjectsMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.2.3mplsFrrFacObjectsMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.2.3.1mplsFrrFacRouteDBTableMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.2.3.1.1mplsFrrFacRouteDBEntryMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.2.3.1.1.10mplsFrrFacRouteDBProtTunStatusMPLS-FRR-STD-MIB