MPLS-FRR-STD-MIB :: mplsFrrFacProtected

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MPLS-FRR-STD-MIB › mplsFrrFacProtected

mplsFrrFacProtected

Module: MPLS-FRR-STD-MIB

OID (symbolic): MPLS-FRR-STD-MIB::mplsFrrFacProtected

OID (numeric): 1.3.6.1.2.1.113.0.1

Node type: NOTIFICATION-TYPE

Description: This notification is generated when a tunnel running over an interface as specified in the mplsFrrConstTable is initially protected by the backup tunnel also specified in the mplsFrrConstTable. In some implementations there may be a difference between when the control plane triggers this notification and when the hardware is programmed to utilize the protection path. Due to the urgency of this operation, it is acceptable for the control plane to either issue this notification before or after it programs the hardware. In cases where it is the latter approach, the notification MUST be sent immediately after the data plane has been altered.

This notification should not be generated for each subsequent tunnel that is backed up by the FRR feature on this LSR, as this may result in potential scaling issues with regard to LSR performance and network loading. Note also that notifications MUST be generated in accordance with the mplsFrrNotifMaxRate.

Note this notification only applicable to the facility based fastreroute protection method, and should be ignored by implementations that do not support this method.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' MPLS-FRR-STD-MIB::mplsFrrFacProtected
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.113.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:56842->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (261829642) 30 days, 7:18:16.42
  SNMPv2-MIB::snmpTrapOID.0 = OID: MPLS-FRR-STD-MIB::mplsFrrFacProtected

Start monitoring Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-FRR-STD-MIB::mplsFrrFacProtected OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.113mplsFrrMIBMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.0mplsFrrNotifMPLS-FRR-STD-MIB
1.3.6.1.2.1.113.0.1mplsFrrFacProtectedMPLS-FRR-STD-MIB