All MIBs › MPLS-FRR-STD-MIB › mplsFrrDetourOutgoing
mplsFrrDetourOutgoing
Module: MPLS-FRR-STD-MIB
OID (symbolic): MPLS-FRR-STD-MIB::mplsFrrDetourOutgoing
OID (numeric): 1.3.6.1.2.1.113.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The number of detour LSPs leaving the device (greater than or equal to 0) if mplsFrrProtectionMethod is set to oneToOneBackup(1), or -1 if mplsFrrProtectionMethod is set to facilityBackup(2).
What is mplsFrrDetourOutgoing?
The count of one-to-one detour LSPs leaving this router; this only counts anything when mplsFrrProtectionMethod is set to oneToOneBackup, and always reads -1 when the device uses facility backup instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.113.1.2 snmpwalk -v2c -c public <target> MPLS-FRR-STD-MIB::mplsFrrDetourOutgoing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.113.1.2.1 snmpget -v2c -c public <target> MPLS-FRR-STD-MIB::mplsFrrDetourOutgoing.1
Start monitoring Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-FRR-STD-MIB::mplsFrrDetourOutgoing OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-TE-capable service-provider router, fast reroute) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.113 | mplsFrrMIB | MPLS-FRR-STD-MIB |
| 1.3.6.1.2.1.113.1 | mplsFrrScalars | MPLS-FRR-STD-MIB |
| 1.3.6.1.2.1.113.1.2 | mplsFrrDetourOutgoing | MPLS-FRR-STD-MIB |