| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoLwappDownloadMIB | 1.3.6.1.4.1.9.9.513.4 | | | This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
The relationship between the controller and the LWAPP
APs is depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Wireless LAN Controller (WLC)
Wireless LAN Controller are legacy mobility device which
can participate in the new mobility architecture.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol |
| ciscoLwappDownloadMIBNotifs | 1.3.6.1.4.1.9.9.513.4.0 | | | |
| NTF cldlScheduledResetNotif | 1.3.6.1.4.1.9.9.513.4.0.1 | | | This notification is generated before the Wireless
LAN Controller (WLC) reset at time specified by the
variable, cldlResetAlertTime. |
| NTF cldlResetFailedNotif | 1.3.6.1.4.1.9.9.513.4.0.2 | | | This notification is generated if controller failed to
scheduled reset. |
| NTF cldlClearResetNotif | 1.3.6.1.4.1.9.9.513.4.0.3 | | | This notification is generated, when the reset entry is
deleted from the table cldlReasetTable. |
| ciscoLwappDownloadMIBObjects | 1.3.6.1.4.1.9.9.513.4.1 | | | |
| ciscoLwappDLApBoot | 1.3.6.1.4.1.9.9.513.4.1.1 | | | |
| clDLApBootTable | 1.3.6.1.4.1.9.9.513.4.1.1.1 | | not-accessible | This table represents the primary and backup software
image loaded on an AP.
An entry in this table gets added when a AP associates
to the controller and entry gets removed when AP
disassociates from the controller. |
| cldlApBootEntry | 1.3.6.1.4.1.9.9.513.4.1.1.1.1 | | not-accessible | Each (conceptual) entry in this table represents version
information for a AP. |
| STR cldlAPName | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.1 | SnmpAdminString | read-only | This object represents the name of the AP. |
| STR cldlAPPrimaryVersion | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.2 | SnmpAdminString | read-only | This object represents the AP primary image version. |
| STR cldlAPBackupVersion | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.3 | SnmpAdminString | read-only | This object represents the AP backup image version. |
| T/F cldlAPSwapImage | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.4 | TruthValue | read-write | This object specifies the action to swap the primary and
backup images of the Access Point (AP).
The value of 'true' indicates that, primary and backup
images will be swapped.
The value of 'false' indicates that, no action is taken. |
| INT cldlAPDownloadImage | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.5 | INTEGER | read-write | This object specifies configuration of the image
type while downloading from WLC to Access Point(AP).
A value of primary indicates that, primary image
is downloaded from the controller.
A value of backup indicates that, backup image
is downloaded from the controller.
A value of abort indicates that, active predownload
of the image aborts on the controller. |
| STR cldlPreDownloadVersion | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.6 | SnmpAdminString | read-only | This object represents the AP predownloaded version. |
| INT cldlPreDownloadStatus | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.7 | INTEGER | read-only | This object represents the status of the
predownloaded image of the AP.
A value of none(1) indicates that, nothing is
predownloading.
A value of intiated(2) indicates that, predownload
initiated.
A value of preDownloading(3) indicates that,
predownload started.
A value of completed(4) indicates that,
predownload completed.
A value of failed(5) indicates that,
predownload failed.
A value of notSupported(6) indicates that,
predownload not supported. |
| NUM cldlPreDownloadNextRetryTime | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.8 | TimeInterval | read-only | This object represents the next retry time for
downloading the AP image from the WLC. |
| U32 cldlPreDownloadRetryCount | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.9 | Unsigned32 | read-only | This object represents the number of retry count
before the AP image downloaded from the WLC. |
| INT cldlPredownloadImageUpgradeRole | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.10 | INTEGER | read-only | This object represents the efficient AP image upgrade role
for the AP.To save time during AP pre-image downloading,
one AP of same AP type can be configured as master which
will first download image from controller and then slaves
in that group will start downloading image from master.
A value of masterCentral indicates that, master AP
downloading image from controller.
A value of masterLocal indicates that, master AP
downloading image from another master.
A value of slaveCentral indicates that, slave AP
downloading image from controller.
A value of slaveLocal indicates that, slave AP
downloading image from master.
A value of unknown indicates that, nothing is
getting downloaded. |
| STR cldlAPSoftwareName | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.11 | SnmpAdminString | read-only | This object represents the software name of the AP. |
| ciscoLwappDLReset | 1.3.6.1.4.1.9.9.513.4.1.2 | | | |
| clDLResetTable | 1.3.6.1.4.1.9.9.513.4.1.2.1 | | not-accessible | This table represents the resetting schedule
of the WLC. User resets WLC by adding a
row to this table through explicit management
action from the network manager. |
| cldlResetEntry | 1.3.6.1.4.1.9.9.513.4.1.2.1.1 | | not-accessible | Each(conceptual) entry in this table represents
the information about WLC reset. |
| U32 cldlResetIndex | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.1 | Unsigned32 | not-accessible | This object represents unique instance of
scheduled reset vector of the controller. |
| DAT cldlResetDateAndTime | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.2 | DateAndTime | read-create | This object specifies to schedule the future
reset time of the controller.
Format: MM/DD/YY:HH/MM/SS. |
| T/F cldlResetSwapImage | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.3 | TruthValue | read-create | This object specifies whether swapping of
the primary and backup images needs to be
done after the WLC reset. On controller,
there are primary and backup images, by
default it will reboot with primary.
A value of 'true' indicates that, primary and backup
images need to be interchaged after the reset.
A value of 'false' indicates that, primary and backup
images are not interchanged after the reset. |
| T/F cldlResetAP | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.4 | TruthValue | read-create | This object specifies whether to reset all the APs
associated to the controller during scheduled reset
of the controller.
The value of 'true' indicates that, resets all the APs.
The value of 'false'indicates that, do not resets
the APs. |
| ROW cldlResetRowStatus | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.5 | RowStatus | read-create | This is the status column for this row and is used
to create and delete specific instances of rows in
this table. |
| T/F cldlResetSaveConfig | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.6 | TruthValue | read-create | This object specifies whether to save the configuration
before rebooting the controller or not.
The value of 'true' indicates that, save the configuration
and resets the controller.
The value of 'false' indicates that, resets the controller
without saving configuration. |
| U32 cldlResetAlertTime | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.7 | Unsigned32 | read-create | This object specifies the number of seconds before
the scheduled reset at which the trap message will
be generated. if cldlResetDateAndTime is less than
cldlResetAlertTime, then the ciscoLwappScheduledResetNotif
notification will not be generated. |
| INT cldlResetBootImage | 1.3.6.1.4.1.9.9.513.4.1.2.2 | INTEGER | read-write | This object specifies image to be loaded
after reset.
A value of primary(1) indicates that, image
selected is primary.
A value of backup(2) indicates that, image
selected is secondary. |
| ciscoLwappDLRestart | 1.3.6.1.4.1.9.9.513.4.1.3 | | | |
| clDLRestartTable | 1.3.6.1.4.1.9.9.513.4.1.3.1 | | not-accessible | This table represents the restart schedule of the WLC.
Restart is a quick reset method. User restarts WLC by
adding a row to this table through explicit management
action from the network manager. |
| cldlRestartEntry | 1.3.6.1.4.1.9.9.513.4.1.3.1.1 | | not-accessible | Each (conceptual) entry in this table represents
the information about WLC restart. |
| U32 cldlRestartIndex | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.1 | Unsigned32 | not-accessible | This object represents unique instance of
scheduled restart vector of the controller. |
| DAT cldlRestartDateAndTime | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.2 | DateAndTime | read-create | This object specifies future restart schedule
time of the controller.
Format: MM/DD/YY:HH/MM/SS. |
| T/F cldlRestartAP | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.3 | TruthValue | read-create | This object specifies to reset all the APs
associated to the controller..
The value of 'true' indicates that, all APs
will be reset.
The value of 'false' indicates that, all APs
will not be reset. |
| ROW cldlRestartRowStatus | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.4 | RowStatus | read-create | This is the status column for this row and is used to create
and delete specific instances of rows in this table. |
| T/F cldlRestartSaveConfig | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.5 | TruthValue | read-create | This object specifies whether to save the
configuration before rebooting the controller.
The value of 'true' indicates that, configuration
is saved and controller will be restarted.
The value of 'false' indicates that, controller
is restarted without saving the configuration. |
| U32 cldlRestartAlertTime | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.6 | Unsigned32 | read-create | This object specifies the number of seconds before
the scheduled restart at which the trap message will
be generated.
Trap will not be generated if schedule restart time is
less than the ResetAlert time. |
| ciscoLwappDownloadMIBConform | 1.3.6.1.4.1.9.9.513.4.2 | | | |
| cldlMIBCompliances | 1.3.6.1.4.1.9.9.513.4.2.1 | | | |
| cldlMIBCompliance | 1.3.6.1.4.1.9.9.513.4.2.1.1 | | | The compliance statement for the SNMP entities that
implement the ciscoLwappDownloadMIB module. |
| cldlMIBGroups | 1.3.6.1.4.1.9.9.513.4.2.2 | | | |
| cldlApGroup | 1.3.6.1.4.1.9.9.513.4.2.2.1 | | | This collection of objects represents the information
about the general attributes and functional
parameters of those APs that have joined the
controller. |
| cldlResetGroup | 1.3.6.1.4.1.9.9.513.4.2.2.2 | | | This collection of objects represents the information
about scheduled reset date and time of the controller. |
| cldlRestartGroup | 1.3.6.1.4.1.9.9.513.4.2.2.3 | | | This collection of objects represents the information
about restart date and time of the controller. |
| cldlNotifsGroup | 1.3.6.1.4.1.9.9.513.4.2.2.4 | | | This supplemental collection of objects represents the
shecduled reset related notifications sent by the agent
to a network management station. |
