MEF-SOAM-PM-MIB :: mefSoamLmCurrentAvailStatsForwardMaxFlr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MEF-SOAM-PM-MIB › mefSoamLmCurrentAvailStatsForwardMaxFlr

mefSoamLmCurrentAvailStatsForwardMaxFlr

Module: MEF-SOAM-PM-MIB

OID (symbolic): MEF-SOAM-PM-MIB::mefSoamLmCurrentAvailStatsForwardMaxFlr

OID (numeric): 1.3.6.1.4.1.15007.1.3.1.2.3.1.14

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This object contains the maximum one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this Measurement Interval. There is one availability flr value for each 'delta_t' time period within the Measurement Interval, as specified in MEF 10.2.1.

The flr value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).

Units are in milli-percent, where 1 indicates 0.001 percent.

What is mefSoamLmCurrentAvailStatsForwardMaxFlr?

Reports the largest per-delta_t availability frame-loss ratio (milli-percent) seen in the forward direction so far during this interval, i.e. the worst (highest-loss) delta_t window observed - useful for spotting a brief severe loss spike that an average would mask.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15007.1.3.1.2.3.1.14
snmpwalk -v2c -c public <target> MEF-SOAM-PM-MIB::mefSoamLmCurrentAvailStatsForwardMaxFlr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15007.1.3.1.2.3.1.14.1
snmpget -v2c -c public <target> MEF-SOAM-PM-MIB::mefSoamLmCurrentAvailStatsForwardMaxFlr.1

Start monitoring Vendor-neutral MEF standard (carrier Ethernet switch/router, Service OAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEF-SOAM-PM-MIB::mefSoamLmCurrentAvailStatsForwardMaxFlr OID value, configure state conditions and alerts, and monitor any Vendor-neutral MEF standard (carrier Ethernet switch/router, Service OAM performance monitoring) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15007.1.3mefSoamPmMibMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1mefSoamPmMibObjectsMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2mefSoamPmLmObjectsMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.3mefSoamLmCurrentAvailStatsTableMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.3.1mefSoamLmCurrentAvailStatsEntryMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.3.1.14mefSoamLmCurrentAvailStatsForwardMaxFlrMEF-SOAM-PM-MIB