All MIBs › MEF-SOAM-PM-MIB › mefSoamLmCfgType
mefSoamLmCfgType
Module: MEF-SOAM-PM-MIB
OID (symbolic): MEF-SOAM-PM-MIB::mefSoamLmCfgType
OID (numeric): 1.3.6.1.4.1.15007.1.3.1.2.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This object specifies what type of Loss Measurement will be performed.
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU generated and received SLR responses tracked lmCcm(3) CCM SOAM PDU generated and received CCM PDUs tracked
The lmSlm value is required. The lmLmm and lmCcm values are optional.
The lmCcm loss measurement values are only valid for a point-to-point MEG. Multipoint MEGs may give unreliable loss measurements.
This object can only be written at row creation time and cannot be modified once it has been created.
What is mefSoamLmCfgType?
Selects which Loss Measurement PDU type this session runs: lmLmm (LMM/LMR), lmSlm (SLM/SLR, the required/default type), or lmCcm (passive counting of CCM heartbeat PDUs, valid only on point-to-point MEGs). It can only be set at row creation and determines which wire protocol the switch uses to measure frame loss toward the peer MEP.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15007.1.3 | mefSoamPmMib | MEF-SOAM-PM-MIB |
| 1.3.6.1.4.1.15007.1.3.1 | mefSoamPmMibObjects | MEF-SOAM-PM-MIB |
| 1.3.6.1.4.1.15007.1.3.1.2 | mefSoamPmLmObjects | MEF-SOAM-PM-MIB |
| 1.3.6.1.4.1.15007.1.3.1.2.1 | mefSoamLmCfgTable | MEF-SOAM-PM-MIB |
| 1.3.6.1.4.1.15007.1.3.1.2.1.1 | mefSoamLmCfgEntry | MEF-SOAM-PM-MIB |
| 1.3.6.1.4.1.15007.1.3.1.2.1.1.2 | mefSoamLmCfgType | MEF-SOAM-PM-MIB |