MEF-SOAM-PM-MIB :: mefSoamLmCfgAlignMeasurementOffset

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MEF-SOAM-PM-MIB › mefSoamLmCfgAlignMeasurementOffset

mefSoamLmCfgAlignMeasurementOffset

Module: MEF-SOAM-PM-MIB

OID (symbolic): MEF-SOAM-PM-MIB::mefSoamLmCfgAlignMeasurementOffset

OID (numeric): 1.3.6.1.4.1.15007.1.3.1.2.1.1.25

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: This object specifies the offset in minutes from the time of day value if mefSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor of 60 minutes. If not, the value of this object is ignored.

If the Measurement Interval is 15 minutes and mefSoamLmCfgAlignMeasurementIntervals is true and if this object was set to 5 minutes, the Measurement Intervals would start at 5, 20, 35, 50 minutes past each hour.

This object can only be written at row creation time and cannot be modified once it has been created.

What is mefSoamLmCfgAlignMeasurementOffset?

Sets a per-session offset in minutes added to the hour-aligned start computed by mefSoamLmCfgAlignMeasurementIntervals; e.g. a 15-minute interval with a 5-minute offset starts intervals at :05/:20/:35/:50. It's ignored unless alignment is enabled and the interval is a factor of 60 minutes.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15007.1.3mefSoamPmMibMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1mefSoamPmMibObjectsMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2mefSoamPmLmObjectsMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.1mefSoamLmCfgTableMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.1.1mefSoamLmCfgEntryMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.1.2.1.1.25mefSoamLmCfgAlignMeasurementOffsetMEF-SOAM-PM-MIB