MEF-SOAM-PM-MIB :: mefSoamAvailabilityChangeAlarm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MEF-SOAM-PM-MIB › mefSoamAvailabilityChangeAlarm

mefSoamAvailabilityChangeAlarm

Module: MEF-SOAM-PM-MIB

OID (symbolic): MEF-SOAM-PM-MIB::mefSoamAvailabilityChangeAlarm

OID (numeric): 1.3.6.1.4.1.15007.1.3.0.1

Node type: NOTIFICATION-TYPE

Description: An mefSoamAvailabilityChangeAlarm notification is sent when the state of mefSoamLmMeasuredStatsAvailForwardStatus or mefSoamLmMeasuredStatsAvailBackwardStatus changes.

The management entity that receives the notification can identify the system from the network source address of the notification, and can identify the PM session reporting the change by the indices in the OID mefSoamLmMeasuredStatsAvailForwardLastTransitionTime, including dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, and mefSoamLmCfgIndex.

An agent is not to generate more than one mefSoamAvailabilityChangeAlarm 'notification-event' in a given time interval per PM session as specified by the mefSoamPmNotificationCfgAlarmInterval. A 'notification-event' is the transmission of a single notification to a list of notification destinations.

If additional availability state changes occur within the mefSoamPmNotificationCfgAlarmInterval period, then notification generation for these changes are suppressed by the agent until the current alarm interval expires. At the end of an alarm interval period, one notification-event is generated if any availability state changes occurred since the start of the alarm interval period. In such a case, another alarm interval period is started right away.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' MEF-SOAM-PM-MIB::mefSoamAvailabilityChangeAlarm
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.15007.1.3.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:65291->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (511469835) 59 days, 4:44:58.35
  SNMPv2-MIB::snmpTrapOID.0 = OID: MEF-SOAM-PM-MIB::mefSoamAvailabilityChangeAlarm

Start monitoring Vendor-neutral MEF standard (carrier Ethernet switch/router, Service OAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEF-SOAM-PM-MIB::mefSoamAvailabilityChangeAlarm OID value, configure state conditions and alerts, and monitor any Vendor-neutral MEF standard (carrier Ethernet switch/router, Service OAM performance monitoring) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15007.1.3mefSoamPmMibMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.0mefSoamPmNotificationsMEF-SOAM-PM-MIB
1.3.6.1.4.1.15007.1.3.0.1mefSoamAvailabilityChangeAlarmMEF-SOAM-PM-MIB