ME1200-QOS-MIB :: me1200QosQceTableRowEditorIpv6SrcIp

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-QOS-MIB › me1200QosQceTableRowEditorIpv6SrcIp

me1200QosQceTableRowEditorIpv6SrcIp

Module: ME1200-QOS-MIB

OID (symbolic): ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6SrcIp

OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506

Node type: OBJECT-TYPE

Type: InetAddressIPv6

Access: read-write

Description: The specified IPv6 source address. The packets source address is AND-ed with the value of Ipv6SrcIpMask and then compared with the value of this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry matches any IPv6 source address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5).

What is me1200QosQceTableRowEditorIpv6SrcIp?

The IPv6 source address to match, AND-ed with Ipv6SrcIpMask; only the least-significant 32 bits of this InetAddressIPv6 value are actually used by the hardware match, so this can only pin down a narrow address suffix, not a full 128-bit address. Only active when FrameType is ipv6(5). This is the row-editor staging copy of me1200QosQceIpv6SrcIp, held here before you set me1200QosQceTableRowEditorAction to commit it as the numbered QCE identified by me1200QosQceTableRowEditorQceId.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506
snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6SrcIp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506.1
snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6SrcIp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506.1 s <value>

Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6SrcIp OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.14me1200QosMIBME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1me1200QosMIBObjectsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2me1200QosConfigME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1me1200QosGlobalsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10me1200QosQceME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2me1200QosQceTableRowEditorME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506me1200QosQceTableRowEditorIpv6SrcIpME1200-QOS-MIB