ME1200-QOS-MIB :: me1200QosQceTableRowEditorIpv6DestIp

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-QOS-MIB › me1200QosQceTableRowEditorIpv6DestIp

me1200QosQceTableRowEditorIpv6DestIp

Module: ME1200-QOS-MIB

OID (symbolic): ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6DestIp

OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510

Node type: OBJECT-TYPE

Type: InetAddressIPv6

Access: read-write

Description: The specified IPv6 destination address. The packets destination address is AND-ed with the value of Ipv6DestIpMask and then compared with the value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros, this entry matches any IPv6 destination address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5).

What is me1200QosQceTableRowEditorIpv6DestIp?

The IPv6 destination address to match, AND-ed with Ipv6DestIpMask; as with Ipv6SrcIp, only the least-significant 32 bits are actually used by the match. Only active when FrameType is ipv6(5). This is the row-editor staging copy of me1200QosQceIpv6DestIp, held here before you set me1200QosQceTableRowEditorAction to commit it as the numbered QCE identified by me1200QosQceTableRowEditorQceId.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510
snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6DestIp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510.1
snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6DestIp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510.1 s <value>

Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv6DestIp OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.14me1200QosMIBME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1me1200QosMIBObjectsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2me1200QosConfigME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1me1200QosGlobalsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10me1200QosQceME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2me1200QosQceTableRowEditorME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510me1200QosQceTableRowEditorIpv6DestIpME1200-QOS-MIB