All MIBs › ME1200-QOS-MIB › me1200QosQceTableRowEditorIpv4SrcPort
me1200QosQceTableRowEditorIpv4SrcPort
Module: ME1200-QOS-MIB
OID (symbolic): ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4SrcPort
OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411
Node type: OBJECT-TYPE
Type: ME1200Unsigned16
Access: read-write
Description: The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not any(0).
What is me1200QosQceTableRowEditorIpv4SrcPort?
The TCP/UDP source port to match, or start of a range; valid range 0-65535, active only when FrameType is ipv4(4) and Ipv4SrcPortOp is not any(0) -- e.g. matching source port 5060 to give SIP signaling its own QoS treatment. This is the row-editor staging copy of me1200QosQceIpv4SrcPort, held here before you set me1200QosQceTableRowEditorAction to commit it as the numbered QCE identified by me1200QosQceTableRowEditorQceId.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4SrcPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411.1 snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4SrcPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200QosQceTableRowEditorIpv4SrcPort.1
Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4SrcPort OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.14 | me1200QosMIB | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1 | me1200QosMIBObjects | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2 | me1200QosConfig | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1 | me1200QosGlobals | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10 | me1200QosQce | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2 | me1200QosQceTableRowEditor | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 | me1200QosQceTableRowEditorIpv4SrcPort | ME1200-QOS-MIB |