ME1200-QOS-MIB :: me1200QosQceTableRowEditorIpv4DestPort

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-QOS-MIB › me1200QosQceTableRowEditorIpv4DestPort

me1200QosQceTableRowEditorIpv4DestPort

Module: ME1200-QOS-MIB

OID (symbolic): ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4DestPort

OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414

Node type: OBJECT-TYPE

Type: ME1200Unsigned16

Access: read-write

Description: The destination port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4DestPortOp is not any(0).

What is me1200QosQceTableRowEditorIpv4DestPort?

The TCP/UDP destination port to match, or start of a range; valid range 0-65535, active only when FrameType is ipv4(4) and Ipv4DestPortOp is not any(0) -- e.g. matching destination port 443 to classify HTTPS traffic. This is the row-editor staging copy of me1200QosQceIpv4DestPort, held here before you set me1200QosQceTableRowEditorAction to commit it as the numbered QCE identified by me1200QosQceTableRowEditorQceId.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414
snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4DestPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414.1
snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4DestPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414.1 i <value>

Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosQceTableRowEditorIpv4DestPort OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.14me1200QosMIBME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1me1200QosMIBObjectsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2me1200QosConfigME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1me1200QosGlobalsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10me1200QosQceME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2me1200QosQceTableRowEditorME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414me1200QosQceTableRowEditorIpv4DestPortME1200-QOS-MIB