ME1200-QOS-MIB :: me1200QosQceTableRowEditorDestMac

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-QOS-MIB › me1200QosQceTableRowEditorDestMac

me1200QosQceTableRowEditorDestMac

Module: ME1200-QOS-MIB

OID (symbolic): ME1200-QOS-MIB::me1200QosQceTableRowEditorDestMac

OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-write

Description: Indicates the 48 bits destination MAC address. The packets destination address is AND-ed with the value of DestMacMask and then compared against the value of this object. If this object value and the value of DestMacMask is 00-00-00-00-00-00, this entry matches any destination MAC address. This object can only be configured if DestMacType is any(0) and DestMacMask is ff-ff-ff-ff-ff-ff.

What is me1200QosQceTableRowEditorDestMac?

The 48-bit destination MAC address to match, AND-ed against DestMacMask before comparison; leaving both this and the mask at 00-00-00-00-00-00 matches any destination MAC, so an admin only sets this when pinning a QCE to one specific device's MAC address. This is the row-editor staging copy of me1200QosQceDestMac, held here before you set me1200QosQceTableRowEditorAction to commit it as the numbered QCE identified by me1200QosQceTableRowEditorQceId.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6
snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorDestMac

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6.1
snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosQceTableRowEditorDestMac.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6.1 s <value>

Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosQceTableRowEditorDestMac OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.14me1200QosMIBME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1me1200QosMIBObjectsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2me1200QosConfigME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1me1200QosGlobalsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10me1200QosQceME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2me1200QosQceTableRowEditorME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6me1200QosQceTableRowEditorDestMacME1200-QOS-MIB