All MIBs › ME1200-QOS-MIB › me1200QosIfConfigQceKeyType
me1200QosIfConfigQceKeyType
Module: ME1200-QOS-MIB
OID (symbolic): ME1200-QOS-MIB::me1200QosIfConfigQceKeyType
OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16
Node type: OBJECT-TYPE
Type: ME1200VcapKeyType
Access: read-write
Description: The key type specifying the key generated for packets received on the interface. Valid values are:
'normal' : Half key, match outer tag, SIP and SMAC.
'double-tag' : Quarter key, match inner and outer tag.
'ip-addr' : Half key, match inner and outer tag, SIP and DIP. For non-IP frames, match outer tag only.
'mac-ip-addr' : Full key, match inner and outer tag, SMAC, DMAC, SIP and DIP.
Filtering on DMAC type (unicast/multicast/broadcast) is supported for any key type.
What is me1200QosIfConfigQceKeyType?
Selects the hardware lookup key type used for QCE matching on this interface -- normal (half key: outer tag plus SIP/SMAC), double-tag (quarter key: inner and outer tag only), ip-addr (half key: both tags plus SIP/DIP), or mac-ip-addr (full key: both tags plus all four addresses) -- trading key width for how many match fields a QCE on this port can actually use at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16 snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigQceKeyType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16.1 snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigQceKeyType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16.1 s <value>
Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosIfConfigQceKeyType OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.14 | me1200QosMIB | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1 | me1200QosMIBObjects | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2 | me1200QosConfig | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2 | me1200QosInterface | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 | me1200QosIfConfigTable | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1 | me1200QosIfConfigEntry | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16 | me1200QosIfConfigQceKeyType | ME1200-QOS-MIB |