ME1200-QOS-MIB :: me1200QosIfConfigDscpRemark

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-QOS-MIB › me1200QosIfConfigDscpRemark

me1200QosIfConfigDscpRemark

Module: ME1200-QOS-MIB

OID (symbolic): ME1200-QOS-MIB::me1200QosIfConfigDscpRemark

OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14

Node type: OBJECT-TYPE

Type: ME1200DscpRemark

Access: read-write

Description: Selects if and how the classified DSCP is written into the packet at egress. Valid values are:

'disabled' : Do not write the classified DSCP into the packet.

'rewrite' : Write the classified DSCP into the packet.

'remap' : Remap the classified DSCP through qosDscpTable, and write the value from EgressTranslation into the packet.

'remap-dp' : Remap the classified DSCP through qosDscpTable. If the classified DPL is 0 then write the value from EgressTranslation into the packet, otherwise write the value from EgressTranslationDp1 into the packet.

What is me1200QosIfConfigDscpRemark?

Selects whether/how this interface rewrites the classified DSCP into the packet at egress: 'disabled' leaves it alone, 'rewrite' writes the classified DSCP directly, 'remap' looks it up through the DSCP table's EgressTranslation column, and 'remap-dp' does the same but uses EgressTranslationDp1 for DPL-1 (yellow) traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14
snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigDscpRemark

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14.1
snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigDscpRemark.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14.1 s <value>

Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosIfConfigDscpRemark OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.14me1200QosMIBME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1me1200QosMIBObjectsME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2me1200QosConfigME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.2me1200QosInterfaceME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.2.1me1200QosIfConfigTableME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1me1200QosIfConfigEntryME1200-QOS-MIB
1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14me1200QosIfConfigDscpRemarkME1200-QOS-MIB