All MIBs › ME1200-QOS-MIB › me1200QosIfConfigDscpClassify
me1200QosIfConfigDscpClassify
Module: ME1200-QOS-MIB
OID (symbolic): ME1200-QOS-MIB::me1200QosIfConfigDscpClassify
OID (numeric): 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13
Node type: OBJECT-TYPE
Type: ME1200DscpClassify
Access: read-write
Description: Selects if and how the classified DSCP is based on the classified CoS and DPL for IPv4 and IPv6 packets on ingress.
If a packet is selected for being classified to a new DSCP, the classification in based on the classified CoS mapped to a new DSCP value through the qosCosToDscpTable. If the classified DPL is 1, the new DSCP value is taken from the DscpDp1 entry, otherwise it is taken from the Dscp entry. Valid values are:
'none' : Always classify to the DSCP value in the received packet and ignore the classified CoS and DPL.
'zero' : If the DSCP value in the received packet is 0, then classify to a new DSCP value based on the classified CoS and DPL.
'selected' : If the DSCP value in the received packet is enabled in qosDscpTable.Classify, then classify to a new DSCP value based on the classified CoS and DPL.
'all' : Always classify to a new DSCP value based on the classified CoS and DPL.
What is me1200QosIfConfigDscpClassify?
Selects whether/when this interface reclassifies a packet's DSCP based on its classified CoS/DPL: 'none' always keeps the received DSCP, 'zero' only reclassifies packets that arrived with DSCP 0, 'selected' only reclassifies DSCP values individually marked Classify=true in the DSCP table, and 'all' always reclassifies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13 snmpwalk -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigDscpClassify
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13.1 snmpget -v2c -c public <target> ME1200-QOS-MIB::me1200QosIfConfigDscpClassify.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13.1 s <value>
Start monitoring Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-QOS-MIB::me1200QosIfConfigDscpClassify OID value, configure state conditions and alerts, and monitor any Cisco ME1200 carrier Ethernet switch (storm control/WRED QoS) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.14 | me1200QosMIB | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1 | me1200QosMIBObjects | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2 | me1200QosConfig | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2 | me1200QosInterface | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 | me1200QosIfConfigTable | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1 | me1200QosIfConfigEntry | ME1200-QOS-MIB |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13 | me1200QosIfConfigDscpClassify | ME1200-QOS-MIB |