All MIBs › ME1200-ACL-MIB › me1200AclAceTableRowEditorRedirectPortList
me1200AclAceTableRowEditorRedirectPortList
Module: ME1200-ACL-MIB
OID (symbolic): ME1200-ACL-MIB::me1200AclAceTableRowEditorRedirectPortList
OID (numeric): 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.12
Node type: OBJECT-TYPE
Type: ME1200PortList
Access: read-write
Description: The ingress port list for this ACE. It is active only when the hit action is denied. Set the action value to 1(deny) before the new setting. Set value 0 to disable the opertion. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is me1200AclAceTableRowEditorRedirectPortList?
Stages the redirect-destination port bitmap for the ACE being built in the row editor, mirroring me1200AclAceRedirectPortList; only meaningful once the staged hit action is set to deny.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.12 snmpwalk -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceTableRowEditorRedirectPortList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.12.1 snmpget -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceTableRowEditorRedirectPortList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.12.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ACL-MIB::me1200AclAceTableRowEditorRedirectPortList OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.17 | me1200AclMIB | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1 | me1200AclMIBObjects | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1.2 | me1200AclConfig | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1.2.1 | me1200AclGlobals | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2 | me1200AclAce | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2 | me1200AclAceTableRowEditor | ME1200-ACL-MIB |
| 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.12 | me1200AclAceTableRowEditorRedirectPortList | ME1200-ACL-MIB |