ME1200-ACL-MIB :: me1200AclAceTableRowEditorIpv4TcpFlagSyn

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-ACL-MIB › me1200AclAceTableRowEditorIpv4TcpFlagSyn

me1200AclAceTableRowEditorIpv4TcpFlagSyn

Module: ME1200-ACL-MIB

OID (symbolic): ME1200-ACL-MIB::me1200AclAceTableRowEditorIpv4TcpFlagSyn

OID (numeric): 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.721

Node type: OBJECT-TYPE

Type: ME1200AclAceFlagOpcode

Access: read-write

Description: Indicates how a IPv4 TCP packet's 'Synchronize sequence numbers' field (SYN) is to be compared. The value 0 means any SYN value is allowed (don't-care field), value 1 means SYN is not equal one (FIN field isn't set) and value 2 means SYN is equal to one (FIN field is set). This object can only be configured if FrameType is ipv4(5) and Ipv4ProtocolType is tcp(6).

What is me1200AclAceTableRowEditorIpv4TcpFlagSyn?

Stages the IPv4 TCP SYN flag check for the ACE being built, mirroring me1200AclAceIpv4TcpFlagSyn; commonly used to isolate new connection attempts once committed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.721
snmpwalk -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceTableRowEditorIpv4TcpFlagSyn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.721.1
snmpget -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceTableRowEditorIpv4TcpFlagSyn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.721.1 s <value>

Start monitoring Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ACL-MIB::me1200AclAceTableRowEditorIpv4TcpFlagSyn OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.17me1200AclMIBME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1me1200AclMIBObjectsME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2me1200AclConfigME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1me1200AclGlobalsME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2me1200AclAceME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2me1200AclAceTableRowEditorME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.2.721me1200AclAceTableRowEditorIpv4TcpFlagSynME1200-ACL-MIB