ME1200-ACL-MIB :: me1200AclAceIngressPortList

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-ACL-MIB › me1200AclAceIngressPortList

me1200AclAceIngressPortList

Module: ME1200-ACL-MIB

OID (symbolic): ME1200-ACL-MIB::me1200AclAceIngressPortList

OID (numeric): 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5

Node type: OBJECT-TYPE

Type: ME1200PortList

Access: read-write

Description: The ingress port list for this ACE. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is me1200AclAceIngressPortList?

A bitmap of switch ports this ACE applies to on ingress, where each bit represents one port (bit set = port included); an admin restricts an ACE to just ports 1-4, for example, by setting only those bits.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5
snmpwalk -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceIngressPortList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5.1
snmpget -v2c -c public <target> ME1200-ACL-MIB::me1200AclAceIngressPortList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5.1 s <value>

Start monitoring Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ACL-MIB::me1200AclAceIngressPortList OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (ACL/rate limiter) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.17me1200AclMIBME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1me1200AclMIBObjectsME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2me1200AclConfigME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1me1200AclGlobalsME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2me1200AclAceME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1me1200AclAceTableME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1me1200AclAceEntryME1200-ACL-MIB
1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5me1200AclAceIngressPortListME1200-ACL-MIB