LUM-OCM-MIB :: ocmIfModuleFailure

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › LUM-OCM-MIB › ocmIfModuleFailure

ocmIfModuleFailure

Module: LUM-OCM-MIB

OID (symbolic): LUM-OCM-MIB::ocmIfModuleFailure

OID (numeric): 1.3.6.1.4.1.8708.2.33.2.2.1.1.25

Node type: OBJECT-TYPE

Type: FaultStatus

Access: read-only

Description: The module HW has detected a failure.

A: The module has failed

D: The module is OK again

What is ocmIfModuleFailure?

Reports whether this OCM interface's hardware module has detected an internal failure (A) or is functioning correctly again (D), the primary hardware-health alarm for this specific optical monitor card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.33.2.2.1.1.25
snmpwalk -v2c -c public <target> LUM-OCM-MIB::ocmIfModuleFailure

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.33.2.2.1.1.25.1
snmpget -v2c -c public <target> LUM-OCM-MIB::ocmIfModuleFailure.1

Start monitoring Infinera-family DWDM optical transport node (Optical Channel Monitor) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-OCM-MIB::ocmIfModuleFailure OID value, configure state conditions and alerts, and monitor any Infinera-family DWDM optical transport node (Optical Channel Monitor) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8708lumentisLUM-REG
1.3.6.1.4.1.8708.2lumGenericLUM-REG
1.3.6.1.4.1.8708.2.33lumOcmMIBLUM-REG
Numeric OIDNameModule
1.3.6.1.4.1.8708.2.33.2lumOcmMIBObjectsLUM-OCM-MIB
1.3.6.1.4.1.8708.2.33.2.2ocmIfListLUM-OCM-MIB
1.3.6.1.4.1.8708.2.33.2.2.1ocmIfTableLUM-OCM-MIB
1.3.6.1.4.1.8708.2.33.2.2.1.1ocmIfEntryLUM-OCM-MIB
1.3.6.1.4.1.8708.2.33.2.2.1.1.25ocmIfModuleFailureLUM-OCM-MIB