All MIBs › LUM-OA-MIB › oaIfWantedSignalPowerLevel
oaIfWantedSignalPowerLevel
Module: LUM-OA-MIB
OID (symbolic): LUM-OA-MIB::oaIfWantedSignalPowerLevel
OID (numeric): 1.3.6.1.4.1.8708.2.19.2.2.1.1.40
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Wanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd.
Note that the output power level is dependent on the power of the input signal, so you might not always get the power that you want.
What is oaIfWantedSignalPowerLevel?
For preAmp25GAd and preAmp10GAd amplifier types, sets the desired signal power offset from the factory production setting, in units of 0.1 dBm; actual output still depends on the input signal's power.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.40 snmpwalk -v2c -c public <target> LUM-OA-MIB::oaIfWantedSignalPowerLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.40.1 snmpget -v2c -c public <target> LUM-OA-MIB::oaIfWantedSignalPowerLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.40.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> oaIfWantedSignalPowerLevel.1
Start monitoring Infinera DWDM optical amplifier module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-OA-MIB::oaIfWantedSignalPowerLevel OID value, configure state conditions and alerts, and monitor any Infinera DWDM optical amplifier module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.19 | lumOaMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.19.2 | lumOaMIBObjects | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2 | oaIfList | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1 | oaIfTable | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1.1 | oaIfEntry | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1.1.40 | oaIfWantedSignalPowerLevel | LUM-OA-MIB |