All MIBs › LUM-OA-MIB › oaIfOutputPowerFail

oaIfOutputPowerFail

OID (symbolic): LUM-OA-MIB::oaIfOutputPowerFail

OID (numeric): 1.3.6.1.4.1.8708.2.19.2.2.1.1.61

Node type: OBJECT-TYPE

Type: FaultStatus

Access: read-only

Description: Output power failed alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB) and Output Power < (Power Limit -1 dB).

What is oaIfOutputPowerFail?

Fault status raised when both the actual gain is more than 1 dB below the wanted gain and the output power is more than 1 dB below the configured power limit, indicating the amplifier cannot meet its target output.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.61
snmpwalk -v2c -c public <target> LUM-OA-MIB::oaIfOutputPowerFail

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.61.1
snmpget -v2c -c public <target> LUM-OA-MIB::oaIfOutputPowerFail.1

Start monitoring Infinera DWDM optical amplifier module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-OA-MIB::oaIfOutputPowerFail OID value, configure state conditions and alerts, and monitor any Infinera DWDM optical amplifier module from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.8708	lumentis	LUM-REG
1.3.6.1.4.1.8708.2	lumGeneric	LUM-REG
1.3.6.1.4.1.8708.2.19	lumOaMIB	LUM-REG

Numeric OID	Name	Module
1.3.6.1.4.1.8708.2.19.2	lumOaMIBObjects	LUM-OA-MIB
1.3.6.1.4.1.8708.2.19.2.2	oaIfList	LUM-OA-MIB
1.3.6.1.4.1.8708.2.19.2.2.1	oaIfTable	LUM-OA-MIB
1.3.6.1.4.1.8708.2.19.2.2.1.1	oaIfEntry	LUM-OA-MIB
1.3.6.1.4.1.8708.2.19.2.2.1.1.61	oaIfOutputPowerFail	LUM-OA-MIB

LUM-OA-MIB :: oaIfOutputPowerFail

oaIfOutputPowerFail

Module

This MIB depends on