All MIBs › LUM-OA-MIB › oaIfConfigurationCommand
oaIfConfigurationCommand
Module: LUM-OA-MIB
OID (symbolic): LUM-OA-MIB::oaIfConfigurationCommand
OID (numeric): 1.3.6.1.4.1.8708.2.19.2.2.1.1.35
Node type: OBJECT-TYPE
Type: CommandString
Access: read-only
Description: Select which amplifier type to use. All modes are not applicable for all type of amplifier boards.
constantGain: Amplifier will set output power according to the input power and the given gain constantSignalPower: Amplifier will set a constant output power with noise-compensation constantPower: Amplifier will set a constant output power independent of input power constantGainLI: Amplifier will work with constant gain in the low input power region (-35 to -5 dBm) constantGainHI: Amplifier will work with constant gain in the high input power region (-25 to +8 dBm) pow10: Power amplifier for 10G pre10ad: Pre-amplifier for 10G in add/drop config. pre25ad: Pre-amplifier for 2.5G in add/drop config. pre10tm: Pre-amplifier for 10G in TM configuration pre25tm: Pre-amplifier for 2.5G in TM configuration
What is oaIfConfigurationCommand?
Read-only report of which amplifier operating mode is selected (e.g. constantGain, constantSignalPower, constantPower, constantGainLI/HI, or one of the fixed pre-amp/power-amp types); not every mode is applicable to every amplifier board.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.35 snmpwalk -v2c -c public <target> LUM-OA-MIB::oaIfConfigurationCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.19.2.2.1.1.35.1 snmpget -v2c -c public <target> LUM-OA-MIB::oaIfConfigurationCommand.1
Start monitoring Infinera DWDM optical amplifier module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-OA-MIB::oaIfConfigurationCommand OID value, configure state conditions and alerts, and monitor any Infinera DWDM optical amplifier module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.19 | lumOaMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.19.2 | lumOaMIBObjects | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2 | oaIfList | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1 | oaIfTable | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1.1 | oaIfEntry | LUM-OA-MIB |
| 1.3.6.1.4.1.8708.2.19.2.2.1.1.35 | oaIfConfigurationCommand | LUM-OA-MIB |