LLDP-MIB :: lldpRemSysCapSupported

MIB Reference — IPNetwork Monitor · Updated September 09, 2026

All MIBsLLDP-MIBlldpRemSysCapSupported

lldpRemSysCapSupported

Module: LLDP-MIB

OID (symbolic): LLDP-MIB::lldpRemSysCapSupported

OID (numeric): 1.0.8802.1.1.2.1.4.1.1.11

Node type: OBJECT-TYPE

Type: LldpSystemCapabilitiesMap

Access: read-only

Description: The bitmap value used to identify which system capabilities are supported on the remote system.

What is lldpRemSysCapSupported?

A bitmap indicating which system capabilities (such as bridge, router, WLAN access point, telephone) a neighboring device supports, as advertised over LLDP. Admins use it to quickly identify what kind of device is connected to a given port, e.g., distinguishing a switch neighbor from an IP phone.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.0.8802.1.1.2.1.4.1.1.11
snmpwalk -v2c -c public <target> LLDP-MIB::lldpRemSysCapSupported

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.0.8802.1.1.2.1.4.1.1.11.1
snmpget -v2c -c public <target> LLDP-MIB::lldpRemSysCapSupported.1

Start monitoring Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-MIB::lldpRemSysCapSupported OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1AB standard (managed Ethernet switch/router/AP/IP phone) from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.0stdSTART-MIB
1.0.8802iso8802START-MIB
1.0.8802.1ieee802dot1START-MIB
1.0.8802.1.1ieee802dot1mibsSTART-MIB
Numeric OIDNameModule
1.0.8802.1.1.2lldpMIBLLDP-MIB
1.0.8802.1.1.2.1lldpObjectsLLDP-MIB
1.0.8802.1.1.2.1.4lldpRemoteSystemsDataLLDP-MIB
1.0.8802.1.1.2.1.4.1lldpRemTableLLDP-MIB
1.0.8802.1.1.2.1.4.1.1lldpRemEntryLLDP-MIB
1.0.8802.1.1.2.1.4.1.1.11lldpRemSysCapSupportedLLDP-MIB